NEW 2012 74' x 30' x 11' ABS 3200hp, 50TBP Tugboat/to e built in USA

Class: ABS, Maltese Cross, A1 Harbor Towing, AMS

 Hull designed & built in accordance with ABS Rules for Ice Class D0

Ready to be delivered

Length: 74' (22.6m)

Beam: 30' (9.1m)

Depth: 13'3" (4.0m)

Draft: 11' (3.3m)

Tonnage: (US Reg): Under 100 gross tons

Bollard Pull: 50 short tons/ 100,000 lbs (estimated)

Free Running Speed: 12 knots

Engines: Two (2) Cummins QSK50, 1600 hp @ 1800 rpm

             (3,200 hp total) Tier II Certified

Gears: Two (2) Twin Disc MG5600 6.04:1 ratio

           with continuous duty rating of 1898hp

Propulsion:

Two (2) 80" diameter x 87" pitch Kaplan-type 4-blade Rice "Aqualloy" propellers, inside Type 37, stainless steel lined, kort nozzles manufactured by Custom Nozzle Fabricators.

Steering:

Hydraulic (HPU) steering system manufactured by Gulf Coast Hydraulics, driving twin rudders behind each propeller.  Jastram Engineering control system with a primary Full Follow-up system and a back-up Non-follow-up system.

Generator Sets: Two (2) 65 KW Onan/Cummins diesel generators

Pumps:  One (1) bilge/ballast pump, one (1) fire and general service pump,

             one (1) fuel oil pump, two (2) fresh water pumps/pressure sets,

             one (1) dirty oil pump, one (1) sewage macerator pump

Air Compressors: One (1) small air compressor for "shop" service

Engine Cooling: The main/auxiliary engines and gears are cooled by engine

 raw water pumps through heat exchangers.

Oily Water Separator: One (1) Heli-Sep Model 500, for use with 300 gallon waste oil storage tank.

Off-Ship Fire-fighting: A single monitor, with a nominal capacity of 2,000 gpm, fitted forward for fighting off-ship fires.  Sea water for the monitor is supplied by a dedicated fire pump driven by one of the diesel generators.

Towing Winch: the Aft Towing Winch is a Jon-Rie Intertech Series 500, with a capacity of 2000 -ft of 1 3/4" Dia. Hawser. The winch produces a line pull of 70,000 lbs,. a line speed of 30 FPM and a brake holding force of 265,0000 lbs.

The hydraulic motor is furnished complete with a re-circulation (free-wheel) valve, which will free-wheel at a line pull of approx 75,000 lbs in neutral position (if the winch is overhauled) and 10,000lbs in the emergency release (abort) mode.

Tank capacities: Fuel: 26,796 gal

                          Potable water: 1,855 gal

                          Lube oil: 500 gal<

Scruton Marine Services - File No. T2326

Please contact Peggy Scruton at 519-583-1636 for further information