RIGGING
- Anodised aluminium mast, necked in at head - 2 Cross tree
levels.
- Standing rigging in single-strand stainless steel discontinuous
- Mast reinforced at foot and pole eye level.
- Spi pole eye - Boom aluminium anodised.
- Bearing sheaves on masthead.
- Boom in anodised aluminium with Gooseneck and Fixing Kicking
strap
- Socket fitting aluminium anodised with rubber waterproofing -
collar tie rods
- Stainless steel shroud/lower shroud and back stay bolt plates -
Stainless steel forestay plate on bow fitting
- Spinnaker halyard block with deflecters
- Bearing deck organisers for putting out foot and reef lines
- Bearing deck organisers for spinnaker and genoa halyards
- 4 strand foot trim with Harken pulleys
- 8: 1 boom down haul with Harken pulleys
RUNNING RIGGING
- 1 Main sheet with Harken pulleys
- 2 Genoa sheets
- Tackle - boom down haul with Harken pulleys
- Genoa and spinnaker barber ropes with Harken pulleys
- Mainsail foot and reef lines
- Genoa and mainsail Cunningham trim ropes
- Backstay trim tackle with Harken pulleys
- Rigging spinnaker : Halyard, sheets, kicker tackle and uphaul
with Harken pulleys
- Genoa halyard
- Main halyard with cleat in mast foot (cable adjustment through
Cunningham)
DECK FITTING
- 2 Rope pouches
- Mainsail Harken traveller track in cockpit bottom
- Mainsail Harken bearing pulleys
- Harken traveller track adjuster camcleats
- Cable adjustment main sheet on Harken turret
- Harken genoa sheet tracks with bearing car - Adjustable under
tension
- Harken genoa sheet lead blocks for windward trim
- Cable adjustment kicking strap uphaul and spinnaker boom
downhaul on *1 swivel camcleats type �Harken�
- Spinnaker and genoa barber haul fairleads
- Harken bearing blocks and camcleats for genoa barber haul
- Harken blocks and camcleat for spinnaker barber haul
- Cunningham blocks and trim camcleats for genoa to port and
starboard
- Backstay tackle with trim camcleat to each side of cockpit
- Cunningham trim and foot tension camcleats on deck house
- 3 Horizontal lead blocks on deck house for lead trim handling
Harken lead blocks and blocks/winch for spinnaker sheets
- Camcleats for genoa and spinnaker halyards
WINCHES
- 2 Winches Harken B16
- 2 Winch handles
- 2 winch handle boxes
|
