For Sale by

Alexander Marine USA - Washington

1001 Fairview Ave. N. Suite 1400
United States

Fax:  206-344-8567

Contact Seller

2006 Boat House 85


Anacortes,WA,United States

Boathouse #5
Channel with Slueth in the back-ground
Twin Bridges Marina
Boat House Electric Door/Curtain
2 x 100Amp Power Outlets. 2 x 50 Amp Power Outlets
Boat House FWD
View Aft of Boat House
FWD work area and Loft
2 x 100 GAL hot water heaters
Ventilation/Extractor fan
Balcony off loft
Well View
FWD work area
AC Distribution panel
Twin Bridges Marina
  • Boat Summary
  • Full Details


Boat House #4 is conveniently located at the Twin Bridges Marina in close proximity to Anacortes Washington. One could not wish for a closer jumping off staging point for cruising the San Juan Islands and the beautiful British Columbia Coast.The boat house can easily and conviently accommodate a 80-90 ft yacht.

Skagit Regional Airport is also very close in the event that you have your own plane.

SIZE: 95' x 32' Overall.

Boat Well: 85'L x 24'W x 33'H(door opening)

Slip Lease: 10 years (4 years remaining) with option to extend two more 10 year terms.


Boat Details
Fuel OtherHull Material Aluminum 
Stock Number Boat House #4Number of Engines 1 

Get a shipping quote
Zip Code:

For Sale by

1001 Fairview Ave. N. Suite 1400
United States

Fax:  206-344-8567


Fabric - 25OZ Translucent flame retardent vinyl coated polyester weave

Boat Door - 22' wide by 28' (off water) high, fabric horizontally folding curtain with 5' wide mesh for venting and electically operated with remote control

2 x side berthing rollers at door opening

2 x steel man door (3'x6' 8") installed

1 x Humidity Fan with humidistat control

7 x bird wire along peak

3 x windows installed in front of building (two upper floor, one on lower floor)

1 x Loft Steel header frame fro light load located 13' above lower deck

1 x steel stair frame to loft

1 x outside upper deck, steel frame and railing


Boat House Float

Dimension Long Side - 108'

Dimension Short Side - 88'

Materials Float - Steel Frame Hot-Dipped Galvanized

Float Modules - EPS Foam filled rotationally molded casings

Freeboard with dead load - 24"

Timber Rub Board 3' x 6" Pressure treated Hem-Fir

Rub Board Covered Polyester Rub guard - White

Interior Deck - Pre-cast concrete

Pile Rings 5 each for slip

Cleats - 8 each at 14'


Building Materials

  • Steel - Hot dipped galvanized steel frame with metal cladding on sides
  • Metal Cladding - CL 900 24 gauge
  • Fabric 25oz translucent flame retardant vinyl coated polyester weave
  • This building is engineered to IBC #204 standards and for a wind load of 85MPH and snow load of 20PSF

Building Dimensions

  • Overall Length - 95'
  • Overall width - 32'
  • Height off water - 34' (before birdwires)


The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.