From the start, she was designed and built to take the punishment of extended offshore cruising. Hulls are hand laid using multiple layers of fiberglass cloth and resin. Thickness varies from near­ly an inch on centerline to about 3/8-inch at the deck edge. The deck and cabin structure are a sandwich construction utiliz­ing balsa as a core material. The hull and deck are joined on an inward flange, bolted on six-inch cen­ters and sealed with 3M 5200 adhesive sealant. There are no prefabricated liners used so nearly the entire interior is accessible for maintenance.

The Bristol Channel Cutter is a small boat capable of circumnavigating the globe and while it may seem a shame to shackle her to the confines of day sailing and coastal cruising, there is no need to venture to far corners of the earth to enjoy this great little yacht.

Recently back from global sailing her very capable owner has taken the time to make her ready for her next exploration. Look at the other boats and prices and then call for further details and to arrange a showing.

27hp Yanmar 3gm less than 1600 hours, very good access

ipod and computer ready connections

GPS Chartplotter in color less than a year old Standard Horizon CP190i

compass

depth sounder/fish finder Eagle Ultra Classic

VHF ICOM IC-M45 plus hand held vhf

Autopilot Tiller drive, Autohelm ST4000

wired for 12volts

the inverter puts out european style 220vac owner has the proper plugs for america standard

30amp shore power connection

mechanical windlass on the bow

solid fiberglass hull, no coring

full keel, transom hung rudder

3 bladed prop

cutter rigged, both head sails on roller furlers

fully battened main, all sails recently serviced and re-stitched as needed

both head sails on roller furlers

solid cockpit enclosure-pilot house style

Pardey's wind vane steering system

mechanical and electrical bilge pumps

set on the starboard side, two burner Origo alcohol stove

refrigeration with an ice maker capability

vast storage areas

airy and light with many opening ports for fantastic cross ventilation

raw water and fresh water foot pumps

ample counter room

large single person V berth with en-suite head

quarter berth to starboard

the saloon dinner table drops down to create a 2 person berth

This proven passage maker can be easily seen at the Harborage Marina in St. Petersburg

All reasonable offers will be considered, anxious owner has employment commitments and needs to move on.  Price reduced accordingly now $74,500.00

New outside pictures have been added to this listing!

For more information or to arrange a visit contact her listing agent:

Antolin "Andy" Rivera at 813.240.0797 English or Español