This is a 4,270 DWT self-unloading cement carrier with an onboard pneumatic load/unloading system. The vessel has been totally upgraded since its new ownership in May 2010, including a change of over 50,000 kilos of steel, a total overhaul of most equipment in the engine department and on the bridge, and has undergone a complete renewal of DNV class, including dry docking. The vessel passed DD Nov 2011, SS in March 2012 and received all new and clean worldwide certificates free from any class and flag state recommendations. As the vessel is now in semi lay-up however, a few items have become overdue. These items will be dealt with, Class will then be brought in and issue new certificates prior to a sale. Class will be changed at that same time, as DNV is too strict for vessels of this age, so another but well recognized organization will be chosen. The Pneumatic System was totally overhauled in 2012 and should be in excellent condition. Vessel can be inspected by appointment.

SPECIFICATION

Type of vessel: Bulk cement carrier

Built: 1978, Australia
LOA: 314’
LBP: 92.62 m
Breadth: 14.0 m
Depth Moulded: 7.22 m
DWT (Summer): 4270 DWT
Draft: 6.001 m
GT: 3523
NRT: 1057

SPEED AND CONSUMPTION

Max Speed: about 12 knots on about 11 TS
Service Speed: about 10.5 knots
Consumption in Port: about 1.2 mt/day
Consumption in Port (Gravity or Transfer): 1.5 - 2.6 MT /day
Consumption During Discharging: 3.9 MT/Day

HOLD AND LOADING DIMENSIONS

Hold Capacities: #1: 820 cbm, #2: 820 cbm, #3 862 cbm, #4 862 cbm: Total: 3364 cbm
No. of Loading Points For Pneumatic Loading: 2/2/8

Diameter of Loading Flange: 480 mm
No. of Loading Points if Gravity Loading: 2
Max. Diameter of Loading Chute Acceptable: 12 inches
No. of Truck Loading Connections: 8
Discharging Flanges: out diameter 480 mm, inner dia. 310 mm, 430, 12 holes 

COMPRESSORS

Max. Air Capacity: Vessel can pump 160 cm
Min. Air Capacity: Vessel can pump c: 57 cm
Max. Discharging Pressure: 2.2 bars
Min. Discharging Pressure: 1.2 bars
Average Discharging Rate: 150 MT/H - One line discharging

PNEUMATIC DETAILS

Pneumatic through 1 or 2 manifolds/lines of connecting flanges of outer dia 480 mm, inner dia 300 mm of 12 bolts 22 mm, 4 flexible hoses of length 6 meter each, 3 reductors 480 mm/408/360 mm (outer dia) discharging with 169 mt/hr through 1 hose of 12 inch over 80 meter horizontal and 25 meter vertical distance with 2 bend of 90 grades type.

LOADING

Mechanical with 250 mt/h through 8 trucks loading connections, by gravity with 200 mt/h through 2 loading points, pneumatic with 250 mt/h by kovako and silo 2 manifolds connect flange of 8 inch.