Flying Tiger Builder
Dealer Locator
Zip/Postal Code*
Country


2013 Flying Tiger 10M

Call

Flying Tiger 10M
Flying Tiger 10M
Flying Tiger 10M
Flying Tiger 10M
  • Boat Summary
  • Full Details

Boat Description

No description




Boat Details
Beam 9 ft 1 inMax Draft 7 ft 7 in
Draft Board/Drive Up 3 ft 3 inDry Weight 4295 lb
Hull Material FiberglassHull Shape Monohull
Fuel Capacity 6 galLength Overall 32 ft 8 in
More Boats from this Seller

Sail Area

  • I: 11.58 m
  • P: 12.36 m  
  • E: 4.25 m
  • J: 3.20 m

Construction

  • Hull and Deck: Vacuum bagged fiberglass sandwich core construction.
  • All interior bulkheads and furniture molded and cored fiberglass construction

Deck and Hull

  • Primary winches: #40 Harken self tailing, aluminum drum 
  • Secondary winches: #16 Harken aluminum drum 
  • Ronstan rope clutches (5 holes) 
  • 8 inch carbon fiber cleats (4 pcs) 
  • Harken adjustable jib leads 
  • Harken mainsheet traveler with controls and fine adjuster 
  • Plastimo manual bilge pump mounted in cockpit 
  • Stainless steel bow pulpit with navigational lights 
  • Stainless Steel stern pulpit with navigational light 
  • Stainless steel stanchions with lifelines 
  • Stainless steel handrails on cabin top (2 pcs) 
  • Stainless steel tiller and carbon fiber extension 
  • Removable rudder blade in cassette 
  • Harken winch handles (2 pcs)

Interior

  • Large V-berth in bow section 
  • Opening hatch above V-berth 
  • Salon with 2 settee berths, chart table/sink with galley pump 
  • 12 VDC main electrical panel with breakers and voltmeter 
  • 2 quarter berths aft under cockpit 
  • LED interior lighting 
  • Storage compartments under all berths

Engine Compartment

  • Adjustable bracket for lowering/raising outboard motor 
  • Compartment for 25 lt. fuel tank, accessible for filling 
  • Compartment vented with electrical blower 
  • Engine controls recess built into cockpit starboard side 
  • Hinged hull closure

Mast and Rigging

  • Mast, boom and prodder made from spun carbon fiber tubing 
  • 2 sets tapered sweptback spreaders, aluminum foil sections 
  • 6. mm 1X19 stainless steel wire rigging, continuous 
  • Adjustable backstay 
  • Facnor jib roller furl apparatus 
  • Windex wind indicator at masthead 
  • Main, jib and spinnaker halyards 
  • Main, Jib and spinnaker sheets 
  • Main outhaul, Cunningham and boom van

Sails

  • 34.2 s/m Dacron mainsail, full battens at top, Cunningham and one reef point 
  • 18.2 s/m Dacron Jib with vision window and hanks 
  • 99.4 s/m Nylon spinnaker

Optional Extras

  • Electric Bilge Pump (1) 
  • Manual toilet 
  • Navigation instrument: Raymarine wind, speed and depth 
  • Salon cushions 2 inch foam and red canvas with piping. (2 pcs) 
  • V-berth cushion 2 inch foam covered in red canvas.(1 pc) 
  • Quarter berth cushion 2 inch foam covered in red canvas (2 pcs) 
  • Fwd cabin canvas door with zipper closure 
  • Salon berth lee cloths made of red canvas 
  • Life line covers (6) made from round foam, PVC pipe and red canvas 
  • Cockpit spinnaker sheet pockets with snap on connectors. (1 pc) 
  • Cockpit all purpose bags with snap on connectors. (1 pc) 
  • Spinnaker dousing bags for forward hatch. (some) 
  • Mainsail cover made of red canvas with lettering. (1 pc) 
  • Tohatsu or Yamaha outboard motor 9.8- 15 hp. With electric start