Haber Builder
Dealer Locator
Zip/Postal Code*

2013 Haber 660 Cutter


Haber 660 Cutter
  • Boat Summary
  • Full Details

Boat Description

HABER 660 gaff cutter is centerboard sailing yacht intended for inshore, coastal and offshore sailing. The yacht has very good nautical properties and is great seaworthy. It rights itself from 180º it means with the mast in down position.

Boat Details
Beam 8 ft 2 inMax Draft 4 ft 9 in
Draft Board/Drive Up 1 ft 4 inDry Weight 3968.32 lb
Hull Material FiberglassLength at Waterline 18 ft 8 in
Length Overall 21 ft 8 inCabin Headroom 6 ft 1 in
Number of Heads 1   
More Boats from this Seller

Detailed Specs
Number of Berths 4   

Hull and Deck

Hand made hull and deck made of glass reinforced plastic
Deck - sandwich
Gelcoat in white color
Slidable hatchway at the entrance to the cabin
Profiled centerboard - laminate - operated from the cockpit
Inner permanent ballast - laminated
Stainless steel towing eye

Deck Equipment

8 plexi windows
Aluminum / plexi hatchway
Vent grates and stainless steel mushroom vent
Anchor storage locker
Ventilated compartments with inside-locking system
Vertically sliding 3-part companionway (plexi)
Stainless steel flagpole
Shelves in cockpit - 2 pcs
Bracket for fixing an outboard engine, for engines up to 37 kg of weight
6 cleats with stainless protection plates
Steering device with a liftable rudder plate
Removable helmsman seats on the stern
Bow counter with wooden step
Stern counters - 2 pcs
Complete guard rail - single line
Stainless steel folding stern ladder
Rubrail PVC - grey


Interior furnishing: oak wood
Galley: 2 cupboards, 2 drawers, stainless sink with outlet, one-burner ORIGO 2000 spirit cooker in galley plate
Folding table - part of the bunk
Complete upholstery - mattresses. Broadened mattresses next to companionway - berth in the cabin
Flexible drinking water tank - 50 l
Electric water pump
Bilge pumps: manual and electric
Head with wash-basin and cupboard under, chemical toilet Porta Potti 365 with movable fastening
Carpet in the cabin


Electric distribution board Philippi STV 108, 8 automatic fuses
Interior lighting: 2 x forepeak, 3 x cabin, 1 x head
Positional lights corresponding to IMO requirements (without BSH)
Battery 110 Ah
12V socket


Gaff slup     30,4 m2
Main sail    12,4 m2
Jib              6 m2
Genoa        12,00 m2


Mast, boom and gaff - aluminum, chromate and powder coating ¡V grey
Stainless steel mast base with winch, cleats and stoppers
Stainless steel kicking strap
Lowering mast system with mast prop on the stern
Mainsail and genoa made of Dacron in white color
Large genoa (12 m2.) on the forestay on the bowsprit for winds up to 4 B. Halyard on the stopper, sheets, additional
Reefing foresail roller - PROFURL 26 - complete equipment
Sheet winches with the crank