Maxi Builder
Dealer Locator
Zip/Postal Code*
Country


Featured Articles

Maxi 1300.

  • Boat Summary
  • Full Details

Boat Description

No description



Boat Details
Beam 12 ft 6 inMax Draft 7 ft 5 in
Dry Weight 17620 lbHull Material Fiberglass
Hull Shape MonohullLength Overall 41 ft 6 in
More Boats from this Seller

Additional Description

  • Interior in mahogany, varnished to a satin finish.
  • All cushions made from suede velour fabrics.
  • 4x pillows, two with Maxi logo.
  • Teak-Jatoba plywood floors 15 mm.
SALOON
  • 1 set of cushions for starboard couch and 1x set of cushion for movable couch.
  • Saloon table with bottle storage.
  • Blinds for fixed side windows.
  • Curtain on s/s pipe.
  • Detachable panels in headliner from GRP.
  • Handrails
OWNERS CABIN
  • Hull cladding in ribbed beech plywood.
  • Blinds for 20? skylight.
  • Headlinerfrom moulded GRP and detachable panels dressed in vinyl.
  • Storage in hanging lockers, chest of drawers and lockers along hull sides.
  • Armchair
  • Mirror.
      STARBOARD AFT CABIN
      • Sea berth adjustable w/ rope&tackle. Fold-away twin berth.
      • Seat w/ cushion.
      • Storage in hanging locker and locker w/shelves.
      • Hull sides dressed in vinyl.
      • Headliner from moulded GRP.
      • Curtains for portlights on s/s pipes.
      • 3x hatches fore access to engine and installations.
      PORT AFT CABIN
      • Seat w/ cushion.
      • Storage in hanging locker, locker w/shelves and lockers along hull side.
      • Hull sides dressed in a combination between ribbed mahogany plywood and vinyl.
      • Headliner from moulded GRP.
      • Curtains for portlights on s/s pipes.
      • Mirror.

Additional Description

  • 12 V electrical system. Battery bank contains of 1x starting battery (75 Ah) and 5x service batteries (375 Ah). Switch panel is placed at the navigation area.
  • Automatic fuses: Nav Lights, Steaming Light, Deck Light, Anchor Light, 3-colour Light, VHF, Instr/Radar, Autopilot, Interior Lights 1-4 , Anchor winch, Heater, FW pump, Bilge pump, Shower pump 1-2, Fridge, Floor light, Tropical fan, Bow Thruster, 12V Outlets, Gauge indicator, WC 1-2, Entertainment, AUX 1-2
  • Level gauges: Fuel, Water, Voltage
  • 12V outlets: 1x Nav Station, 1x Galley, 1x Owners Cabin
  • Main fuse panel, placed under couch in saloon.
  • S?kringar: Radio, Mem Clock, Heater, Bilge Pump, Aux
  • Huvudbrytare: Engine, Aux
  • Charging: 115 Amp generator on engine. Electronic charging regulator.

Additional Description

  • Worktop in composite of natural minerals and acrylic polymer.
  • Stainless steel double sink.
  • Top loaded fridge 100 L Isotherm w/ Danfoss compressor.

Additional Description

  • 3 x Fire extinguisher.
  • Fire-port for engine room.

Additional Description

  • Volvo Penta D2-40 E-EVC engine with a S130 saildrive.
  • Freshwater cooled incl sea water filter.
  • Teleflex Morse engine controls.
  • Folding 3-blade propeller.

Additional Description

  • White, high-temperature NGA gelcoat.
  • The hull is produced by infusion in a female mould and partially laminated in iso-polyester, partially in DCPD-Ortho polyester.
  • A sandwich laminate made of 20 mm PVC core is used all through the hull.
  • Reinforcement from a mix between woven and uni-directional roving.
  • The keel area is a solid laminate as well as the laminate around major through hull fittings.
  • Striping with vinyl tape
  • White topcoat on the hull in all lockers, bilges and similar exposed areas.

Additional Description

  • White, high-temperature NGA gelcoat.
  • The deck is laid up by hand in a female mould with integrated anti slip surfaces and laminated in DCPD-Ortho polyester.
  • A sandwich laminate made of 15 mm & 20 mm PVC core is used in all horizontal surfaces.
  • The deck is glued to the hull and subsequently bolted.
  • White coat in all visible areas.
  • Glove boxes in the cockpit with teak frames.

Additional Description

NAVIGATION STATION
  • Seat cushion.
  • Chart table w/ wooden trims.
  • Separate compartment in navigation table for laptop computer and charts.

Mast and Rigging

  • Mast is fractionally rigged with a keel stepped mast base and a tapered top section. Tube produced from silver anodised aluminium.
  • Mast head: Box with sheaves for main halyard & main topping lift, clevis pin for backstay, Windex.
  • Hounds: Sheave box and leads for gennaker/spinnaker halyard, nose for forestay, shroud backing plate, sheave box for jib halyard and topping lift.
  • Spreaders: 2 sets of anodised aluminium airfoil sectioned spreaders with spreader brackets. Sweep angle 25?.
  • Deck Level: Boom bracket, Kicker bracket, Deck ring assembly, Tie rod assembly, Mast heel & mast base.