Designed in cooperation between Najad / judel,vrolijk & co and Dick Young designs, the new 355 (10.9m LOA) is a superbly made, contemporary looking cruising yacht for the modern age.
With her clean looking appearance and low side profile its clear to see the new 355 is the result of superb design, inside and out. Equally important is the fact that we have evolved our product further by offering the 355 as our first yacht constructed from vacuum-infused epoxy resin technology. Key benefits include a superior resin to fibre bond giving a significantly 'stiffer' hull with up to 30% higher tensile strength and greater resistance to micro-cracking and fatigue. Epoxy resin shrinks less as the hull cures, this allows for a more homogenous bond and a better transfer of load between the different components of the hull. The risk of osmosis occurring in later years can be reduced virtually to zero.

• The interior is of extremely high quality throughout, with mahogany and jatoba as the main types of wood.
• A selection of high quality fabrics are included in the standard specification.
• There are additional alternative upholsteries such as leather and alcantara.
• In other respects too the Najad 355 offers virtually unlimited scope for creating an interior that meets your personal needs.

• Code locked 12 volt domestic system
• Remote controlled domestic main switch
• AGM Batteries 240 Ah
• Digital water and fuel tank meters showing contents in litres/gallons
• Battery charger
• 230 or 115 volt shore supply system

• Volvo S-drive 28,4 h.p.
• Volvo 3-blade folding propeller
• Heating in all cabins Holding tank with warning indicator (75% full)
• Electric emergency bilge pump
• Manually operated bilge pump
• Water heater

• The strong, well-dimensioned hull is designed to offer first-class sailing properties without encroaching on interior space, comfort or safety.
• The hull is built in a sandwich construction, using the epoxy vacuum infusion technique.
• Part of the construction is Divinycell.
• Divinycell is a resilient, high-density PVC foam with sealed cells that do not absorb water.
• Density (hardness) is increased and the material is reinforced at points in the hull where equipment is fitted.

• You can choose navigation equipment to suit your particular needs.
• The examples below come from Raymarine, a renowned supplier working with Najad for many years.
• Raymarine series of navigation instruments for simple and clear display of the most important functions on board.
• Autopilot: ST6002+ Shows data from up to 7 SeaTalk pages on a high-quality LCD screen.
• Multifunctional colour screen for radar functions, map plotter and fishing sonar: C80 with 8.4 inch TFT LCD or C120 with 12.1 inch TFT LCD.
• There is also the option of the E80 or E120.
• Radar antenna: 18 or 24 inch radom antenna with output of 2 and 4 kW respectively.
• VHF with DSC (Digital Selective Calling).
• Comprehensive software for navigation system.
• RNS map plotter, map rotation, transparency control, supports vector 3D raster.