Nordic Star Builder
Dealer Locator
Zip/Postal Code*

Nordic Star 32 Cruiser

32 Cruiser
Exterior Detail
  • Boat Summary
  • Full Details

Boat Description

Nordic Star Cruiser is a 9.2 metre, single-engined, 'retro' style motor boat, designed for cruising in fjords, lakes and inland waters - or even in rougher coastal waters. It has been built using the latest in manufacturing techniques alongside traditional styling and quality principles. 
Capable of seating up to six pasengers, Nordic Star Cruiser also has simple accommodation, with two berths, an enclosed head, a large hanging locker and an exterior galley - ideal for short stay weekend trips. 
The Nordic Star Cruiser is manufactured in e-glass technical fabrics and polyester resin, with a solid e-glass hull bottom, along with composite e-glass and PVC foam-cored topsides and deck. The styling is to 'yacht standards' with extensive use of teak in both the interior and exterior fit out. 
The Nordic Star Cruiser is offered with either Yanmar or Volvo Penta engines driving a conventional shaft and propeller.

Boat Details
Beam 9 ft 2 inDry Weight 7495 lb
Max Seating Capacity 6Hull Material Fiberglass
Hull Shape Modified VeeFuel Capacity 66 gal
Length at Waterline 27 ft 9 inLength Overall 31 ft 8 in
Holding Tank Size 11 galWater Capacity 13 gal
More Boats from this Seller

Additional Description

From the bow:
  • Fixed windscreen with wooden trim integrated with targa base.
  • Cabin access hatch (double door, folding hatch).
  • SB helm position.
  • Targa bar over for mounting toplight, optional radar and antennas.
Ps fore:
  • Pilot seat with cooling box and two burner stove below.
  • Behind this seat a small Corian (or similar) work top with round sink with h/c water and locker space below.
  • Locker space to be with varnished teak doors.
SB Helm position:
  • single seat.
  • steering wheel, engine controls, rev counter.
  • speed log/ depth sounder.
  • tank sounding displays.
  • main switch / fuse panel.
  • controls for navigation/ lighting.
Aft part of the cockpit:
  • Step for proper access from dockside.
  • Engine casing integrated as a forward/aft looking seat (One size for engine range).
  • Round seat for approx. 6 persons with removable teak table with folding side leaves.
  • 12 cm cushions with alcantara or similar, 8 cm backrests. Aft CL piece to be removable for access through door to swim platform.
  • Hatches in seating top.
  • In cockpit bottom hatches for maximum access. Cockpit floor in 8 mm teak.

Additional Description

  • The interior is built in teak with cream white ceiling.
Seating area:
  • Roundset benches with 12 cm cushions and 8 cm seatbacks in alcantara or similar.
  • Storage space below and behind.
  • Inspection Hatch to f?peak and bow thruster.
  • 18 mm plywood floorboards teak-holy.
  • 2 light points.
PS aft:
  • Hanging locker with shelves outside.
  • Microwave oven with sliding shelf (worktop) below. Below this, a drawer and double door locker.
  • 1 light point.
  • Toilet area is built in white painted panels mainly.
  • Pump toilet
  • Worktop in Corian with wash basin.
  • 20 mm plywood floorboards teak-holy.
  • 1 light point.
  • Inspection hatch to steering position systems.

Additional Description

Hull fittings
  • Stainless steel rubrail along sheer.
  • rubrail (partial, near wl aft).
  • Swim platform.
  • Shower with h/c water.
  • Stern anchor installation (type of anchor to be confirmed by client) with electric winch.

Additional Description

  • Foredeck (8mm teak)
  • 2 fairleads, 2 retractable cleats.
  • Deck locker.
  • pulpit with attachments for bow ladder. Cabin top (8mm teak):
  • rimmed hatch.
  • handrail (2x).
  • Wooden rimmed windscreen. Side deck and aft deck (8mm teak):
  • 2 fairleads, 2 retractable cleats.
  • 3+3 fittings for fenders (fenderlines with clips).
  • Filling points for water and diesel.
  • Extraction point for black water.
  • (all fittings and details to be in Stainless Steel)