38’ x 12’ Steel Passenger Vessel/Dive Boat
Built in 1998 by Wray Brown
Gross tonnage: 11 tons
Construction
I-beam keel
10 gauge skin with 3/16” x 2 longitudinal stringers on 9 ¾ centers
3 watertight comp
Full skeg and supported rudder
Cabin 12 gauge steel
Safety glass
Running Gear
Engine – Iveco SRM 6061 (270 hp – Needs to be rebuilt
Transmission – Volvo hyd. HIS (2.62-1) - New in 2004
Prop – 24” x 22”
Forced water in stuffing box
2 x 60 gal fuel tanks
Racor 1200 filter w/ switching manifold
Dry stack with new muffler and pipes
Steering
Jastram 2” hydraulic ram with manual helm pump (equipped with emergency steering) New in 2004
Electronics: 2 VHF radios, sounder, (2) GPS, radar
Cabin: Equipped with helm chair (new in 2004) and removable folding seats (8)
Recent Upgrades
3’ stern extension/dive platform with 5’ boarding ladder (fin on type)
New steel deck in main cabin 
New steering ram/helm pump
New fuel tanks
New exhaust systems
New dive benches
New passenger handrails
New electronics
Compartment Sizes
Forepeak – 4 foot (chain locker – collision bulkhead)
Lower cabin - with head/storage 6 foot
Main cabin – 10’ wide x 12’ long with 5’10” headroom, 6’ in center
- lots of windows, lots of sound insulation
Aft deck – 10’ x 12’ with removable bench seating for 12 – tank racks (12 sets)
Swim platform – (buoyancy tank – floatation compartment – ballast) 3’
- with large ladder and handrails - storage rack
Walk through transom door (with pound boards)

The forward (lower) cabin has not been finished – owner intended to add bunks in this area and to enlarge the head so that it would work as a changeroom. If the owner does finish this fwd cabin the price of this vessel will be increased.

This boat is a real charmer and has a sporty flare to it – it looks like a sportfisher – but has a workboat heart. The present owner uses this boat for dive charters/passenger tours as well as commercial work. It would make a great dive/crew boat or could be used for fishing charters or perhaps turn into a nice private yacht.

Located in Eastern Ontario

Price has been reduced because the engine needs to be rebuilt
Price reduced from $68,250 CDN to $26,250 CDN

Scruton Marine Services - File No. W2112

Please contact Peggy Scruton at 519-583-1636 for further information