The TAYANA 65 was designed by Robert Harris to meet the needs of those yachtsmen who demand the maximum of everything -- maximum comfort and maximum safety at sea. She comes in several different configurations and Ta Yang offers great flexibility in the design and layout of the accommodations. The 65 offers the experienced, knowledgeable yachtsman an opportunity to own a world class yacht with virtually no compromises.

Cast iron ballast encapsulated

• Hand laid up FRP with KNYTEX and Baltex cored sandwich
• Molded nonskid on deck and deck house
• Teak cockpit seats and floor
• FRP cockpit coaming
• Aluminum hatches
• Stainless steel opening ports
• Teak exterior handrails
• Stainless steel stern pulpit
• Aluminum toe rail with hawse holes & (6) mooring cleats
• Vetus Dorade vents with FRP boxes
• FRP seahood
• Propane locker for (2) 20# tanks, vented overboard
• Lazaret hatch
• (2) Coaming lockers
• Plexiglass or Teak weather boards
• Swimming ladder, stainless steel, mounted on molded swim/dive platform on transom aft
• Double stainless steel anchor sprit with stainless steel rollers
• Chain locker and (1) deckpipe
• Stainless steel stanchions with vinyl covered double life lines with gates port and stern
• Stainless steel bow pulpits
• Aluminum mainsheet traveler with roller cars
• Aluminum staysail traveler tracks with cars
• Aluminum genoa tracks with cars
• Winched LEWMAR; cutter
• (2) 66 CST jib sheet
• (2) 54 CST secondary sheet winches
• (2) 44 CST mainsheet winches
• (1) 46 CST halyard winch
• (1) 40 CST halyard winch
• (1) 30 CST halyard winch
• Plexiglass sliding companionway hatch
• Instrument console mounted on seahood

• Diesel engine--YANMAR 6-3544 135 HP (or equivalent) with Scatra flex coupling
• Engine cooling water intake strainer
• Dripless shaft gland on 316 stainless steel prop shaft
• Bronze 3-blade propeller
• Fiberglass drip pan
• Engine room blower

• Teak joinery & cabinetry throughout
• Teak & holly cabin sole
• Teak veneer in all lockers
• White formica counters in head & galley
• Teak framed mirror in head(s)
• Interior teak handrails
• V-berth filler (if applicable)
• Cloth cushion covers on 4" cushions
• Ice chest insulated with 4" foam & stainless steel lined
• Interior varnished with high quality polyurethane satin
• Stove alcove stainless steel lined
• Easily removable head liner
• Teak ceiling on all exposed hull areas
• Teak fiddles & teak trim on counters & tables
• 4" Foam cushions
• Solid teak doors & frames
• Engine room sound insulated

• (2) 200-amp hour batteries
• (12) 12v Cabin lights overhead & (8)reading lights
• 12v Electrical system with 3-way switch
• NEWMAR electric panel with breakers
• Volt meter & ammeter
• 12v Power outlets throughout the yacht
• Electrical system totally bonded
• 110v Shore power system with 50-amp power socket
• Electric panel with breakers
• Voltmeter & ammeter
• 110v Outlets throughout yacht
• International rules running lights to meet IMCO standards
• 12v Deck flood light
• 12v Anchor light

• Pedestal steering, cable mounted in special FRP pedestal
• Stainless steel 40" destroyer-type steering wheel
• Teak emergency tiller
• Stainless steel rudder shaft

• (2) 75-gallon Mild steel fuel tanks
• (2) Stainless steel fresh water tanks, total of 250 gallons
• 30-gallon Holding tank, FRP
• Hot water heater 110v & engine heat exchanger
• Manual marine heads
• Hot and cold pressure water system to heads, galley and other areas required
• (1) High capacity manual bilge pump
• (1) Heavy duty electric bilge pump
• Bilge pump strainers
• Sea cocks on all through hull fittings
• Shower sump tanks with 12v pumps in each shower