BRING YOUR OFFERS - Bruce Roberts Ketch Rig Sailboat. Steel hull construction. 50% completed. 47,000 lbs displacement, 17,000 ballast, 1135 square feet sail area. Includes onboard sauna for two, full galley with gimbaled stove. A36 grade steel used throughout construction, 3/16 inch thickness on the hull and bulkheads, 4 Onboard tanks (use them for fuel or water storage). Perkins 50 HP diesel inboard (with less than 2 hrs SMOH) with extra injectors
Exterior has 2 coats of Rustoleum primer for protection from the elements (Entire top deck covered with heavy duty tarp which makes boarding a challenge yet has kept the harsh weather away.
We would strongly recommend sandblasting the entire exterior, and then completing the finish prior to launch (once this is in the water, it will likely stay in the water).
For completion, this is preliminary list of items that it will need.
Winches, rigging, standing rigging, pilot house fabrication, running gear completion, etc.
custom 55' mast (recycled street light pole (octagonal) with a 25' boom
custom 35' mizzen mast
Call Jason today to arrange a tour of this unique vessel.
NOTE: this boat has never been in the water and is located at Watergate Marina. Due to it's overall height, and width, it is not able to be transported over land from it's current location.
The keel is 17' long, 4' deep, 2' wide
The rudder is 4' wide overall and 5' tall
From the bottom of the keel to the deck is 13' (add another 4' for the cabin top and pilot house)
Launching the boat will take significant time, effort and money