Maxi 1060
Year 2009
Length 35 ft
Price Call

Boat Details
Hull Material FiberglassHull Shape Monohull 
Beam 10 ft 8 inMax Draft 6 ft 2 in 
Dry Weight 10927 lbFuel Capacity 20 gal 
Length at Waterline 30 ft 8 inLength Overall 34 ft 7 in 
Water Capacity 30 gal    

No description

Additional Description
  • Interior in mahogany varnished to a satin finish. All cushions in suede velour fabrics.
  • Teak-Coto laminate plywood floors 18mm.
  • 4x small pillows of which two with Maxi logo.
  • Couches convertible to berths. Double berth on port when extension pulled out.
  • Removable saloon table.
  • Hull cladding in mahogany.
  • Curtains fitted in covered tracks.
  • Detachable panels in ceiling.
  • Access to storage below seat cushions.
  • Handrail in ceiling.
  • Sleeping cushions incl. infill cushion.
  • Hull cladding in vinyl.
  • Blind for skylight.
  • Ceiling with combination of GRP headliner and detachable panels.
  • Lockers along hull sides.
  • Sleeping cushions.
  • Hull cladding in vinyl.
  • Ceiling made of detachable panels.
  • Hanging locker and shelves along hull side.
  • Curtains on s/s pipes.
  • Door for easy access into engine-room.
  • Mirror.
  • Shower discharge pump.
  • Wet locker aft of heads.
  • Stainless steel sink with discharge.
  • Toilet paper holder behind locker door.
  • Clothes hooks.
  • Mirror on door.

Additional Description
  • 12Volt electrical system. The battery bank contains 1x starting battery 75Ah and 3x service batteries 75 Ah. Main switch panel is placed at the navigation table;
  • Circuit breakers:, Nav Lights, Steaming Light, Deck Light, Anchor Light, 3-colour Light, VHF/Radio, Instr/Radar, Autopilot Aux, Interior Lights 1, Interior Lights 2, Interior Lights, FW pump, Bilge pump, Shower pump, Fridge, Power
  • Level gauges: Fuel Level, Water Level, Voltmeter
  • 12V sockets: 1x navpanel, 1x cockpit, 1x heads
  • Main circuit breaker panel placed at companionway:
  • Fuse Groups: Radio, Mem Clock, Heater, Bilge Pump, Aux
  • Main Switches: Engine, Aux
  • Battery charging by 115Amp generator on the engine.
  • Volvo Penta electronic battery charging regulator.

Additional Description
  • Countertop in composite natural minerals and acrylic polymer.
  • Wood trim on countertop outer edge.
  • Stainless steel double sink.
  • Top loaded fridge Isotherm w/ Danfoss compressor 40L.

Additional Description
  • 2x Fire extinguisher 2 kg powder.
  • Fire-port for engine room.

Additional Description
  • A three-cylinder Volvo Penta D1-20 C-EVC with a MS25S sail drive.
  • Freshwater cooled incl. sea water filter.
  • Teleflex Morse engine controls.
  • Folding 2-blade propeller.

Additional Description
  • White gelcoat
  • The hull produced by vacuum assisted infusion, with the outer skin from Vinylester and remaining laminate in iso-polyester.
  • Sandwich laminate made of 15mm PVC core on the topsides above the turn of the bilges.
  • Reinforcement from a mix between woven and uni-directional roving.
  • Solid laminate in the keel area as well as the laminate around major through hull fittings.
  • White topcoat on the hull in all lockers, bilges and similar exposed areas.
  • Striping with vinyl tape

Additional Description
  • White gelcoat.
  • The deck is laid up by a combination of hand lay-up and spray lay-up, with integrated anti-slip surfaces.
  • Sandwich laminate made of 15mm PVC core in all horizontal surfaces.
  • Deck is glued and bolted to the hull.
  • White topcoat in all exposed areas.
  • Glove boxes in the cockpit with teak frames.

Additional Description
  • Seat cushion.
  • Navigation table w/ storage for charts.
  • Hanging locker.

Mast and Rigging
  • Mast is fractionally rigged with a keel stepped mast base. Seld�n C175x93mm tapered top mast section made of silver anodised aluminium.
  • Mast head: Head box with sheaves for main halyard & topping lift, clevis pin for backstay, Windex.
  • Hounds: Sheave box for spinnaker pole lift, spinnaker and jib halyard, halyard lead, nose for forestay, Shroud backing plate,
  • Spreaders: 2 sets of silver anodised aluminium airfoil sectioned spreaders with spreader brackets. Sweep angle 25�.
  • Deck Level: Boom bracket, Kicker bracket, Deck ring assembly, Tie rod assembly, Mast heel & mast base.
  • Other: 2 x Spinpole eyes. 6x rope slot fittings.