Oy Nautor Ab
  Nautor Holding srl
  Contact Information
+39 055 240382
Nautor Swan 75 FD
Innovative approach to cruising
Year 2013
Length 76 ft
Price Call
Nautor Swan 75 FD

Boat Details
Hull Material FiberglassHull Shape Monohull 
Beam 19 ftDry Weight 83800 lb 
Fuel Capacity 346 galLength at Waterline 63 ft 10 in 
Length Overall 76 ft 4 inHolding Tank Size 26 gal 
Water Capacity 330 gal    


Nautor's Swan 75 FD

The Swan 75 FD is extremely seaworthy and capable of crossing the roughest oceans, whilst maintaining her owner in a state of luxury, and a beauty synonymous with every Swan built.

  • Innovative approach to cruising
  • Comfortable cruiser with modern styling
  • Large internal volumes
  • Moderate displacement
  • Easy sail handling
  • Available in both Raised Saloon& Flush Deck versions
  • Long range capability


The Hull
The Swan 75 hull is of single skin construction using glass/aramid hybrid fibre reinforced polyester laminate with vinylester skin coats. The mast bulkhead is of carbon fibre pre-preg construction and the structural bulkheads at bow and stern are of foam cored GRP. The remainder are of marine plywood. The swan 75 has a 3.1m draught keel, which is relatively shallow for a 75-foot yacht, however it's composition, in solid lead from top to bottom, offers a large amount of stability.

The Rig
Many aspects of the Swan 75 are designed with simplicity and short-handed sailing in mind. The 28.7m carbon mast is supported with four sets of swept-back spreaders, an inner forestay and just one set of runners. The fully battened mainsail lowers into a Park Avenue boom, and the headsails are easily handled on a hydraulic furling system.

The Deck
The main deck is a sandwich construction using glass/aramid hybrid fibre reinforced polyester laminate with closed cell foam core on the 75FD and vinylester, instead of polyester on the 75S. The Swan 75FD has a guest cockpit amidships with the sailing cockpit aft, separated by a bridgedeck. This is the traditional swan Flush Deck concept with primary and secondary winches mounted on the aft cockpit coamings. One of these doubles as the mainsheet winch, whilst two halyard/utility winches are situated aft of the mast. The mainsheet traveller is hydraulically adjustable with a built-in Navtec cylinder, should her owner prefer to cruise effortlessly with a shorthanded crew.


The Swan 75 FD interior layout is with the owners cabin aft (one double or two single berths) and an ensuite toilet that has a separate stall shower. There are three guest cabins, two aft and one forward.

The Saloon
She has a spacious interior finished in handcrafted teak with outstanding attention to detail. With the main saloon it is possible to have an optional Plasma TV on the starboard side, outboard of the settee. Aft of the settee is the navigation area. The dining area on the port side of the main saloon incorporates the L-shaped settee and two Swan chairs around a solid teak table.

The Galley
In the galley, the standard supplied equipment includes a four-burner gas stove, along with a microwave oven, two refrigerators and a freezer.

Sails and Rigging

I: 94.16 ft 28.70 m
J: 27.82 ft 8.43 m
P: 88.68 ft 27.03 m
E: 30.22 ft 9.21  m
ISP: 96.08 ft 29.285 m

Sail Area

Fore triangle: 1310 sq.ft 121.7 m²
Main sail: 1591 sq.ft 147.8 m²
110% Jib: 1388 sq.ft 129.0 m²
Asymm Spinnaker: 4811 sq.ft 447.0 m²