Search Boats for Sale

Hallberg-Rassy 39 Mk II


Presented For Sale By:

Randy Altemus Office

Brewer Yacht Haven Marina
Stamford, Connecticut, 06904
United States
View Seller Inventory

Contact Seller

* We weren't able to post your message, please check the highlighted fields and try again.


We have sent your information directly to the seller.

Request cannot be completed

You may have entered incorrect information or the server is temporarily down. Please reload this page and try again later.

Contact Seller

* We weren't able to post your message, please check the highlighted fields and try again.


We have sent your information directly to the seller.

Request cannot be completed

You may have entered incorrect information or the server is temporarily down. Please reload this page and try again later.

Make Hallberg-Rassy
Model 39 Mk II
Year 2003
Condition Used
Price US$308,000
Type Sail
Class Center Cockpit
Length 39 ft
Fuel Type Diesel
Hull Material Fiberglass
Location Norwalk, Connecticut
LOA 40 ft 1 in
Length at Water Line 32 ft 3 in
Beam 12 ft 4 in
Max Draft 6 ft 1 in
Keel Type Fin
Displacement (Dry Load) 22050 lb
Ballast 9261 lb
Total Sail Area 807 uom.sqft
Max Bridge Clearance 56 ft 12 in
Cabin Headroom 6 ft 6 in
Engine Type Inboard
Engine Model D2-55
Fuel Type Diesel
Engine Year 2003
Power 55 hp
Drive Type Direct Drive
Propeller Type 3 Blade
Folding Propeller Yes
Propeller Material Bronze
Rope Cutter Yes
Designer German Frers
Builder Hallberg-Rassy Marine
Cabins 2
Double Berths 3
Heads 1
Fuel Tanks 2 x 99.3 gal (Stainless Steel)
Fresh Water Tanks 2 x 118.9 gal (Stainless Steel)
Holding Tanks 2 x 36 gal (Stainless Steel)
Hull Shape Displacement
Windlass Electric Windlass


With the the HR 39 series being yet another very successful center-cockpit German Frers design, the "MANITOU" is the 208th example produced (out of total of 219 built) by the renowned HALLBERG-RASSY MARINE of Sweden and as an improved 2003 model "Mark II" edition. The HR 39 Mk II was also produced to the CE Category "A", "Unlimited Ocean Voyaging" as were all versions of her HR 39 predecessors,

The HR 39 Mk II "MANITOU" has most definitely benefited from all her previous years of being a lightly-used "short-Season fresh-water" boat and being Winter-stored indoors as well. Her interior & exterior, to include all systems & the teak decks, are just in superb condition as one would expect. She was only just introduced to salt-water and under new Ownership in 2014!

Since her recent acquisition in the late Summer of 2014, the "MANITOU" has had significant improvements and upgrades implemented to complement her outstanding overall condition. Starting with a "full bottom job" last in the Fall of 2014, her complement of communication and navigation & performance electronics and the autopilot has all been updated with the most current ICOM and FURUNO units, The "MANITOU" also has had her sails, running rigging & all the yachts' systems brought up-to-date re maintenance, replacement or improvement.

As ably demonstrated by the performance and features of the HR 39, the "MANITOU" is being offered for brokerage sale now due to the Owners' desire to acquire a larger HALLBERG-RASSY for more extended cruising with Family & friends. The "MANITOU" represents a unique opportunity to acquire the desirable HR 39 Mk II version that is in both the condition and equipage configuration that is "second to none" and with all the benefits of that a knowledgeable and experienced Owner can provide.

The MANITOU is at her slip  in Norwalk CT for the 2017 Season. She's ready to go to all destinations, North or South! Clients looking such an exceptional yacht should make an appointment to inspect this "rare to the market" opportunity as represented by the MANITOU.


Show More…

Manufacturer-Provided Description (overview)

The hull and deck of the HR 39 are built under constant supervision of the Lloyd's Register of Shipping, and a Lloyd's Certificate is supplied with each boat. Hull and deck are from GRP by the hand-lay-up method, insulated above water. Decks and coachroof areas are of sandwich type construction. The large cockpit is well-protected by a windscreen made of tempered glass and a sprayhood. The middle section of the windscreen opens. In the stern is an integrated bathing platform with folding ladder. The interior is finished in mahogany with a matte silk varnish. Berth and seats are covered in superb Dralon material to withstand wear and tear and possible staining and dampness. Due to the well-planned layout, there is always unobstructed passage from forward to aft cabin. Aft cabin and also the toilet compartment are secluded even if doors remain open. Being closely located together, the navigation area, engine room and instrument panels form a natural unit. Ample stowage in all areas of boat.

Hull & Deck

The "MANITOU" has the standard production as follows:

  • Naval Architect:  German Frers
  • CE Category "A":  Unlimited Ocean Voyaging


The MANITOU had a full "bottom job" accomplished in the Fall of 2014. The purpose was to remove all of the "fresh-water compatible" anti-fouling paint & prepare her for future salt-water operations. A total of (5) coats of epoxy barrier coating and bottom paint were applied.

  • Topsides: White Gelcoat
  • Sheer Stripe & Boot-Tops:  Blue Gelcoat
  • Rub rail, teak w/ stainless steel striker plate
  • Scoop transom with boarding ladder, teak inlay for scoop
  • Bow stem head fitting, stainless steel w/ (2) integrated bow anchor rollers (2nd is Factory optional)
  • Fin keel, lead with bulb (note: special external flush-mounted bronze drain plug in port side of lower keel sump for drainage & cleaning)
  • Skeg-mounted rudder (note: rudder was rebuilt, 2014)
  • Bottom paint, blue (new application, Spring 2015)


  • Deck & coachroof:  Ivory White Gelcoat
  • Teak decks, 1/2" (12mm), for deck & coach roof
  • Teak cap rails
  • Chafe strips, protective, stainless steel & placed at wear areas for dock lines
  • Bow pulpit, double-rail stainless steel, "Butterfly" style w/ open front section
  • Stern pulpit, double-rail w/ double wire gate lines w/ GIBB pelican hooks
  • Life-lines, double stainless steel w/ GIBB pelican hook gates, port & starboard
  • (2) Hand rails, teak full-length on coach roof
  • Genoa tracks, LEWMAR Ocean Series & mounted inboard w/ double LEWMAR sheet cars each side w/ control lines leading aft to LEWMAR turning blocks to lead fair to the LEWMAR 54 CST winches
  • Mainsheet traveler track system, LEWMAR Ocean Series mounted aft part of cockpit w/ 3:1 cross-hauls & leads to (2) L48 CST winches
  • LEWMAR Ocean Series 80mm HL mainsheet blocks and jammers for mainsheet control
  • LEWMAR Ocean Series double 80mm HL sheave turning blocks for jib & staysail sheets
  • TORLON ball bearings fitted to LEWMAR jib / genoa cars (note: in lieu of standard sliders)

  • Bow Sprit, Factory Option removable for Gennaker

  • Bow anchor well

  • LEWMAR electric / mechanical anchor windlass w/ deck-mounted "up" & "down" control switches (note:  windlass was completely serviced, 2014-2015)
  • (6) Mooring & dock line cleats, large aluminum forward, amidships & aft
  • Wheel steering, SOLIMAR binnacle unit w/ integral binnacle guard, stainless steel w/ cable system & wheel brake (note: 2.5 turns lock-to-lock)
  • LEWMAR folding wheel w/ leather-wrap option (note: original stainless steel wheel w/ wrap is available as a "spare")
  • Teak grating in cockpit
  • Windshield, forward of companionway w/ built-in center opening section, tempered glass w/ aluminum frame (note:  the sprayhood / dodger folds up on top of the windshield & has an integral cover)
  • (2) Grab rails, aluminum, integrated into the windshield, port & starboard sides
  • Cockpit & deck storage via (2) large lockers, (1) cockpit seat locker  (starboard side) and (1) Lazarette locker aft in transom area

Exterior Wood

  • Laid teak on deck.
  • Varnished teak on wheel pedestal.
  • Laid teak on coach roof
  • (2) Teak aft stern rail seats
  • (2) Varnished teak wash boards
  • (2) Exterior chart tables, port & starboard, at Companionway entrance
  • Teak grating for Cockpit
  • (2) Teak grab / safety rails on coach roof


The HALLBERG-RASSY 39 Mk II was built with the traditional excellent Factory interior furniture throughout that is produced with a Mahogany veneer finished with a satin ("matte silk" per the Factory) varnish application. The cabin sole is of a teak & holly veneer with a matte finish.

The observation is made that the MANITOU is in exceptionally good condition below to include all spaces, upholstery and interior furniture as well.

  • Headroom:  Main Salon 6'6" (1.98m), Forecabin 6'1-1/2" (1.87m) & Aft Cabin 6'+ (1.84m)
  • (2) Lee-cloths for Man Salon berths, port & starboard

Ventilation & ambient lighting

  • Companionway hatch, sliding
  • Companionway boards (2), louvered teak w/ special stowage slots provided in the cockpit seat locker, starboard side
  • (10) LEWMAR Opening ports w/ insert screens; (1) Forecabin, (1) Head, (6) Main Salon & (2) Aft Cabin
  • (1) Portlight, fixed (in Aft Cabin)
  • (4) LEWMAR deck hatches w/ insert screens; (1) Forecabin, (1) Head, (1) Main Salon & (1) Aft Cabin
  • (3) HELLA 12 VDC Turbo-fans, black, mounted on the bulkheads throughout 
  • (4) Dorade vents, deck-mounted for the Main Salon (2) & Aft Cabin (2)
  • (2) ELECTROLUX "mushroom style" automatic vents, stainless steel & mounted on deck;  (1) Forecabin & (1) Head 
  • Engine room ventilation system

Interior Decor

  • Deluxe Factory Upholstery, Tric/Dole/Ting/Elo Medium Blue Fabric w/ gold pattern, 5" / 12cm thickness
  • Snap-in protective carpeting, beige pattern, over teak / holly sole throughout (note: except at Galley)
  • Window curtains throughout for all hatches, opening ports & portlights, Off-White Fabric mounted on rod assemblies
  • Sprung mattress, At Cabin double bunk (starboard side) (note  Aft Cabin w/ wide starboard bunk option w/ 39.4" = +10cm)
  • Sprung mattress, Aft Cabin single bunk (port side)
  • Cushion inserts / infills for Forward & Aft Cabin berths
  • Custom bedding for Fore- & Aft Cabins to include cushion covers & sheets (note: sample shown in one of the Forecabin photos & Owner notes "sheets have never been used")
  • Draw curtain for Forecabin (at entrance), full-length light beige fabric


There is space provided for the installation of a microwave oven unit in the Galley area with a 110 VAC outlet for service.

  • FORCE 10 stainless steel stove / oven, propane & gimbaled
  • Stove / oven safety bar, stainless steel
  • (2) Propane tanks, 10# aluminum (note: installed in dedicated deck loker, starboard side amidships)
  • TRUMA remote electric propane tank shut-off solenoid switch (at Galley)
  • Hot & cold pressure water system
  • (2) Polished stainless steel sinks
  • Fresh-water foot-pump 
  • Ice-box drain foot-pump
  • ISOTHERM SP-System water-cooled refrigeration, 12 VDC;  (1) top-loading refrigerator at Galley & (1) top-loading dual-function refrigerator / freezer (note: located  port side, across from the Galley & abaft the Nav Station seat)

  • Toaster oven, BREVELLE stainless 110 VAC

Rig, Rigging, Winches & Sails


The MANITOU is equipped with the Factory-provided SELDEN mast & boom system, silver anodized aluminum w/ double-spreaders & internal halyards. The mast is deck-stepped.

The standing rigging is 1x19 stainless steel wire. There are a total of (6) aluminum shroud rollers provided for the forward & aft lowers & the main shrouds.

Running rigging includes (1) Main halyard, (2) Jib / Genoa halyards, (1) Spinnaker halyard, (1) Staysail halyard & Spinnaker pole lift

Rig Dimensions (mast height above waterline (estimated 57' / 15.9m):  I=51 (15.49m, approx), J=14.1' (4.31m), P=45.8' (13.96m) & E=16.0' (4.89m). The "working sail area" is published at 807 sq/ft with the standard mainsail & jib

Running Rigging

Note:  All running rigging inspected & replaced as necessary, 2014-2015.

  • SELDEN Furlex 300S Roller-Furling System
  • Cutter / Inner-forestay system w/ (2) additional deck track cars, running backstays, fiddle blocks & sheets
  • Spinnaker equipment; masthead block, spinnaker halyard, SELDEN carbon fiber spinnaker pole w/ topping lift & SELDEN jockey pole / reaching strut
  • Boom Topping Lift
  • Mainsail halyard (w/ spare)

  • (2) Jib / Genoa halyards

  • Factory Option removable Bow Sprit, stainless steel, for Gennaker usage

  • SELDEN backstay tensioner, manual

  • SELDEN boom vang, rigid "RodKicker" spring / oil unit w/ LEWMAR adjustment block & tackle
  • Wire standing rigging, stainless steel
  • (7) Shroud rollers, aluminum for main shrouds (upper & forward & aft lowers) & backstay
  • Whisker pole, aluminum
  • Spinnaker pole, carbon fiber (note: never used)

Winches (LEWMAR) 

Note:  All winches completely serviced, 2014-2015.

  • (2) L54 STC (2) speed genoa sheet winches
  • (2) L48 STC (2) speed mainsheet control winches (note: instead of standard L30 CST winches)
  • (2) L40 STC (2) speed Main & jib / genoa halyard winches on mast
  • (1) L24 C (2) speed winch for spinnaker halyard
  • (1) L8 C single-speed winch for reefing


  • ELVSTROM Full-batten mainsail, Dacron loose footed w/ SELDEN RCB-track, Lazy-Jacks & integrated "Stack-Pack" mainsail cover on boom (note: also w/ flattening reef, 2015)
  • ELVSTROM Mainsail, Dacron (note: never used, still in original bag
  • ELVSTROM #2 Genoa, Dacron. 419 sq/ft (39 sq/m), 130% roller-furling w/ foam luff & UV protection

  • ELVSTROM Working Jib, Dacron, 247.6 sq/ft (23 sq/m), roller-furling

  • ELVSTROM Cutter / Inner-forestay jib, Dacron, 183 sq/ft (17 sq/m) w/ hanks (per the Owner, "never used")
  • QUANTUM SAILS Cruising Gennaker / Asymmetrical Spinnaker w/ Snuffer, sheets and TYLASKA tack hardware (new, 2013)

  • QUANTUM SAILS Cruising Code 0 w/ integrated HARKEN Roller-Furling  (new, 2017)


The old RAYMARINE / RAYTHEON Navigation electronics have been replaced with (3) FURUNO NavNet TZtouch technology units for GPS / Chart-Plotter / Radar Display functions, FURUNO FI-70 Performance Instrument Displays (4x in Cockpit Console, 1x at Nav Station) & a FURUNO FI-50 Multi Display at the Helm Station

The new FURUNO System NavNet TZtouch Displays are all connected via a Gray Box to repeat the Master Unit performance and navigation information.  


  • ICOM IC-M502 VHF radio at Nav Station w/ ICOM HM-127 & CommandMic II at the Helm Station (new, 2015)

  • Insulated backstay w/ (2) MK1 & MK3 grounding plates and copper foil strips laid against hull for future SSB installation  


  • SUUNTO compass at Helm Station (note: custom installation to accommodate new FURUNO NavNet TZtouch Multi-Function Display)
  • FURUNO 9" TZT9 NavNet TZtouch GPS / Chart-Plotter / Radar Display at Nav Station (new 2015)

  • FURUNO 14.1" TZT14 Navnet TZtouch GPS / Chart-Plotter / Radar Display at portside Nav Table in Cockpit (new, 2015)

  • FURUNO 14.1" TZT14 NavNet TZtouch  GPS / Chart-Plotter / Radar Display at Helm Station (new, 2015)
  • FURUNO 4kW 24 Radar w/ Radome that is gimbaled & mounted on backstay (new, 2015)
  • (3) FURUNO FI-70 Series Performance Color LCD Instruments for Speed, Depth & Wind functions mounted in Console just above the Companionway entrance (new, 2015)

  • FURUNO FI-70 Repeater in Console
  • FURUNO FI-50 Multi-Function Display at Helm Station (new, 2015)

  • FURUNO Electronic Remote Compass (new, 2015)
  • FURUNO NavNet TZtouch AIS System (new, 2015)


  • SIMRAD AP-28 Autopilot w/ controls at Helm Station (all new, 2015)


  • DSC-Pacific antenna (DSC / GSM / VHF / TV / SSB / AM / FM radio)
  • PIONEER AM / FM stereo w/ CD changer, INFINITY Sea and Symphony speakers, (2) w/ remote control in Main Salon & (2) in Cockpit (mounted in Instrument Console)


The MANITOU has a 12 VDC Ship's Service and 110 VAC Shore Power Systems "as built".

  • Battery charger, MASTERVOLT ChargeMaster 12/100-3 100 AH (new, 2015)

  • Inverter, MASTERVOLT Sine, 2000 Watt, 115 VAC (new, 2016)

  • ODELCO DC 4000 Battery control

  • NEMA RS 232C Interface box 

  • Extra 12 VDC outlets;  at Nav Station & at (exterior) Cockpit Navigation Table, port side

  • Extra 110 VAC outlets; Galley, Nav Station, Main Salon, Fore- & Aft Cabins 

  • Emergency Start Switch at Engine Start battery


  • (6) GelCell batteries, heavy-duty (all new, 2015), (1) Engine Start, & (5) Ship's Service / House .

Power Generation 

  • FISCHER-PANDA 4 kW diesel generator, fresh water cooled 110V VAC (note: installed in F-P sound box in engine room, starboard side & generator completely serviced, 2017)
  • Engine alternator, 60 AH
  • WEMA DC Voltmeter (installed at Nav Station)

Lighting, Interior

  • (5) Reading lights throughout, bulkhead-mounted w/ chrome finish;  (2) Forward & (2) Aft Cabins & (1) Nav Station 

  • (8) Overhead lights;  (1) Forecabin, (6) Main Salon & (1) Aft Cabin
  • (1) Dome light (in Head)

  • (2) Florescent lights; (1) Galley & (1) Head
  • Automatic interior lights for Hanging Lockers (throughout) & Engine Room

Lighting, Exterior

  • Navigation lights (mounted on bow & stern rails)
  • Masthead light; Tri-Color top light w/ anchor light
  • Foredeck light
  • Steaming light

Propulsion & Maneuvering

The MANITOU is equipped with a VOLVO-PENTA D2-55 fresh-water cooled (4) cylinder marine diesel rated at 55 HP at 3000 RPM.

  • Insulated engine room w/ perforated metal shielding
  • RACOR fuel filter
  • GORI (3) Blade feathering propeller

  • Additional (3) Blade propeller, the original bronze prop & now a "spare" (note:  stored in engine room)

  • AMBASSADOR rope / line cutter on prop shaft

  • SLEIPNER Side-Power Bow Thruster, 6 HP, controlled at steering pedestal with foot switches w/ stainless steel intake / discharge guards, port & starboard (note: bow thruster motor replaced with a new unit, 2017)


Note:  the F-P genset & MA A/C systems were completely serviced, 2014-2015.

Climate Control

  • WEBASTO Airtop 3500 diesel cabin air heater with outlets in Cabins & Head.

  • MARINEAIR air conditioning system, (2) zone, water-cooled 110 VAC w/ 12k and 7k BTU service to the Main Salon & Aft Cabin

  • Engine / electric-immersion water heater, insulated w/ service to Main Salon & Aft Cabin

  • (3) HELLA Turbo-Fans, 12 VDC interior bulkhead-mounted & throughout

Fuel & Water

  • (2) Fuel tanks, stainless steel;  (1)  bilge tank below the Cabin sole & (1) upper tank located below the Main Salon port side settee, aft. The tanks are mounted in series, controlled by a connecting valve. The total capacity is 99.3 US Gallons (376 liters)

  • (2) Fresh Water tanks, stainless steel;  (1) bilge tank below the Cabin sole  & (1) upper tank located below the port side settee, forward. The tanks are mounted in series, controlled by a connecting valve. The total capacity is 118.9 US Gallons (450 liters) 

  • (2) WEMA tank quantity gauges, (1) Fuel & (1) Water (installed at Nav Station)

Pumps & Systems

  • Hot & cold pressure water system w/ service at Galley & Head w/ single-lever controls
  • Filter, removable cartridge (carbon type) for FW System
  • Shower, hot & cold, aft at transom / stern platform area
  • Electric shower sump drain in Head

  • Electric sump drain pump for both refrigerator & refrigerator / freezer.units

  • (2) Foot-pumps (both at Galley);  (1) Galley  ice-box / refrigeration & (1) fresh-water supply, manual
  • Bilge pump, manual in Cockpit
  • Bilge pump, electric / automatic (also w/ Emergency Cockpit Control w/ alarm)
  • Anchor / Deck wash down pump, salt- or fresh-water


Note: the Marine Head & related systems were completely serviced, 2014-2015, to include new hoses.

  • Headroom 6'2" (1.88m)
  • Marine Head, manual
  • Sink & Shower (hand-held) w/ pressure hot & cold fresh water service
  • Shower sump to a "gray water" box w/ manually-operated electric sump pump for discharge overboard
  • Holding tank(s), stainless steel; (1) 11 US Gallon unit w/ "Y" valve & deck pump-out plate & (1) custom 25+ US Gallon unit (note: latter w/ deck pump-out only)

Additional Inventory

Ground Tackle

  • LEMAR electric / manual anchor windlass w/ rope capstan & chain gypsy

  • Anchor windlass controls (via foot switches) at bow.& w/ remote control "up / down" foot switches at Helm Station

  • Deck / Anchor wash-down pump, 12 VDC w/ hose & nozzle (note: fresh- or sea--water)
  • CQR Plow anchor, 45 lbs w/ 164' (50m) x 3/8" (9.5mm) chain w/ WASI Power Ball anchor / chain swivel connector
  • BRUCE Anchor w/ 90' rode


  • PFD's

  • LIFESLING (mounted at on stern rail, port side)
  • Life / Jack lines & webbing (on deck w/ attachment points, forward & aft)

  • Safety Harness Tether Fittings, (2) in Cockpit, stainless steel

  • Fire extinguishers in Main Salon, Forward & Aft Cabins 

  • Emergency tiller

Canvas (Light Beige canvas unless otherwise noted)

  • Cover w/ "HR" Logo for custom FURUNO TZtouch Repeater & custom SUUNTO compass display installations on steering pedestal and wheel & folding teak cockpit table, Light Beige SUNBRELLA (all new, 2015)
  • Dodger w/ aluminum frame & boot cover for windshield top stowage, Light Beige ROSSY KAPPEL for HALLBERG-RASSY MARINE (HRM)

  • Full Cockpit Bimini cover w/ stainless steel frame, Light Beige canvas ROSSY KAPPEL for HRM (note:  removable window panel cover to monitor the mainsail)
  • Cover, SUNBRELLA Light Beige for FURUNO TZtouch Cockpit Display (at Nav Table, port side at Companionway, new 2015)
  • Winch covers

  • Mainsail cover, Blue SUNBRELLA

Storage & protection

  • MILLER MARINE full Winter Cover, canvas w/ metal frame (new, 2015)
  • Shipping cover, canvas / vinyl


  • Dock lines & fenders
  • Cockpit table, folding teak w/ (2) leafs, varnished (& w/ cover)
  • Cockpit cushions, full set, Blue SUNBRELLA w/ silver piping (new, 2015)
  • Cockpit cushion, backrest & folding, Blue SUNBRELLA (note:  for starboard side of Cockpit)
  • (2) Winch handle holders (on mast & in Cockpit)
  • Swim ladder, folding stainless steel, mounted in "scoop" transom area
  • Outboard motor mount bracket (installed aft, starboard side stern rail)
  • (2) Rod / jackstaff holders aft on stern rail, stainless steel, port & starboard
  • Crane / lift for outboard motor, custom stainless steel w/ block & tackle (new, 2015)
  • Brass kerosene lamp, gimbaled (installed at Companionway entrance at Galley, starboard side)
  • WINDEX Spar-fly
  • Clock & Barometer set in Main Salon
  • Art work in Main Salon (note:  mounted w/ non-marring tape)


  • Personal tools & possessions


The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

Presented For Sale By:

Randy Altemus Office

Brewer Yacht Haven Marina
Stamford, Connecticut, 06904
United States
View Seller Inventory

Contact Seller

* We weren't able to post your message, please check the highlighted fields and try again.


We have sent your information directly to the seller.

Request cannot be completed

You may have entered incorrect information or the server is temporarily down. Please reload this page and try again later.

Presented For Sale By:

Randy Altemus Office

Brewer Yacht Haven Marina
Stamford, Connecticut, 06904
United States
View Seller Inventory

Contact Seller

* We weren't able to post your message, please check the highlighted fields and try again.


We have sent your information directly to the seller.

Request cannot be completed

You may have entered incorrect information or the server is temporarily down. Please reload this page and try again later.


Get a Shipping Quote

Cheap Boat Transport Services - Save up to 80%

Shipping Estimate: Unavailable
Please request quotes and estimates below:

View Details

Shipping Estimate:Unavailable
Please request quotes and estimates below:

View Details