Specifications:   Year:                       2006                       LOA:                       6.36 m Beam:                     2.54 m                                              Draft:                      0.75 m Construction:                                                                     GRP      Hull/Keel:               Planing HIN:    PABALNH3H5B707   Description: The Arvor 215 is a handsome boat with lines that are both stylish and practical, with a shippy, seaworthy promise inherent in its design. Its underwater section is best described as a semi-planing hull, but one which can get along at a fast enough clip, with a sprightly 17kts being the suggested cruising speed.   Engine(s) & Electrical: VW 100-5, 100hp diesel. Recent works carried out include: new turbo, new shaft, new cutlass bearing, new shaft seal, new R&D coupling, timing reset, new belts, new glow plugs, new coolant hoses, new dual mass flywheel, new engine mounts, new Jabsco pump. Serial number: BCU002026. Engine hours: 530. Drive type: shaft. Maximum speed: 20kts. Last serviced: December 2018. Fuel capacity: 90 litres. Twin batteries charged from the engine.   Accommodation & Below Deck: Single berth, cabin cushions, chemical toilet, single ring gas cooker.   Deck & Canvas: Anchor, anchor locker, anchor windlass (new), warps, fenders, cockpit lockers, new skin fittings.   Navigation & Safety: Furuno radar, Tracker 5605 chart plotter, Lowrance HDS7M chart plotter, log/speed indicator, Navman VHF, compass, Fish 4500 fishfinder/echosounder, navigation lights, Navtex, fishfinder, lifejackets, flares, engine & cabin fire extinguishers, bilge pump (new).   Miscellaneous: Viewings are by appointment only. For an instant insurance quote call Euromarine Insurance Services on 01843 603345 Disclaimer: The particulars detailed herein are intended to give a fair description of the vessel, but their accuracy cannot be guaranteed. These particulars are supplied on the understanding that all negotiations shall be through Highway Marine Ltd who are acting as brokers for the vendor. The vendor is not selling in the course of a business unless otherwise stated. The prospective purchaser is strongly recommended to check the particulars, and where appropriate, at his own expense, to employ qualified independent agents to carry out a survey, and/or any mechanical and electrical checks.