Menu
Close

Mako 204 CC

Request Price

 The versatile and dependable MAKO® 204 CC is ready for everything from patrolling the beaches to targeting sailfish. The aggressive Deep V hull slices through choppy seas, and the hull/deck joint is chemically bonded and mechanically fastened with stainless steel fasteners every 6"—it's truly built stronger than it has to be. Besides being a superior offshore fishing machine, the 204 CC features bow seating at port and starboard with fishboxes beneath, a forward-console cushioned seat with a 21-gallon baitwell beneath, and a large in-floor storage compartment—making it perfectly welcoming for both fishermen and families.

  • Backed by the MAKO® Assurance 5+Life—the best factory warranty in the business
  • Foam-injected hull w/1-piece fiberglass stringer grid
  • Hull/deck joint chemically bonded & fastened 360° w/316 stainless steel fasteners
  • 124-qt. (117 L) in-floor storage compartment
  • Under-gunnel port & starboard rod racks
  • Center console w/analog gauges, electronics mounting surface, stainless steel grab rail, acrylic windscreen & storage
  • 2-tone high-density marine-grade vinyl upholstery w/stain-resistant coating & composite substrates on seats
  • 2 pedestal helm seats & forward console seat w/21-gal. (80 L) baitwell
  • Port & starboard bow seating w/80-qt. (76 L) insulated fishboxes w/gravity drains
  • Custom-matched, tandem-axle aluminum trailer w/brakes

Additional Specs

  • Length:20' 4"
  • Beam: 8' 4"
  • Bottom width: 6' 7.5"
  • Max. recommended HP: 225 HP
  • Fuel capacity: 87 gal.
  • Max. person capacity: 8 persons
  • Max. person weight: 1450 lbs.
  • Max. person, motor & gear weight: 2300 lbs.
  • Interior depth: 25"
  • Transom height at center line: 25"
  • Deadrise: 18 degrees
  • Draft: 12"
  • Dry weight: 2635 lbs.
  • Average hull weight: 2000 lbs.
  • Average package weight: 3435 lbs.
  • Package height: 8' 8"
  • Package height w/T-top or hardtop: 10' 1"
  • Storage length: 28' 9"

Standard Features

Certification & Safety

  • Backed by the MAKO® Assurance 5+Life—the best factory warranty in the business
  • NMMA® certified
  • Factory leak tested for hull, plumbing & fitting integrity
  • Stainless steel hardware & fasteners for corrosion resistance
  • CorrosionX stainless spray treatment included
  • Horn

Console

  • Binnacle-mounted motor control
  • Gauge panel w/analog gauges
  • Heavy-duty electrical switching system w/battery selector switch(es)
  • Easy access to helm electronics, instruments & switches
  • Forward-console seat w/21-gal. (80 L) baitwell
  • Integrated full-width footrest
  • Acrylic windscreen
  • Marine-grade tinned wiring w/submersible connectors
  • 2 console drink holders

Construction & Exterior

  • 100% composite construction
  • Hull/deck joint chemically sealed & bonded 360° & mechanically fastened every 6" (15.24 cm) w/316 stainless steel fasteners
  • 1-piece molded fiberglass stringer grid w/integrated transom knee supports
  • Closed-cell foam-injected stringer grid for USCG-approved flotation
  • Premium marine-grade stainless steel hardware
  • Heavy-duty rub rail & insert
  • Closed-molded hatch covers w/finished undersides & integrated gaskets
  • Aluminum backing plates for cleats, chocks & hinges
  • Reboarding step & stainless steel grab handle
  • MAKO® Bone White gelcoat

Electrical, Mechanical & Plumbing Systems

  • USCG-compliant navigation lights
  • Labeled, tinned-copper wiring for easy maintenance & protection in a marine environment

Interior

  • Anchor locker
  • Foredeck dodger mounting boss
  • Port & starboard bow seats w/80-qt. (76 L) fishboxes w/gravity overboard drainage
  • 124-qt. (117 L) in-deck storage compartment
  • Low profile stainless steel bow rails
  • 2 pedestal helm seats w/slide & swivel
  • Self-bailing cockpit
  • 2 gunnel-mounted rod holders
  • Port & starboard under-gunnel rod racks for 6 rods
  • Molded non-skid surfaces throughout
  • Bilge access hatch
  • Port & starboard molded-in swim platforms
  • Six 6" (15.24 cm) polished marine-grade stainless steel cleats

Performance

  • Legendary dry-riding MAKO® hull
  • Aggressive deep V hull design
  • Performance lifting strakes
  • Factory-matched propeller

T-Top or Hardtop

  • .25" (.64 cm) aluminum backing-plate reinforcement for T-top mounting

Trailer

  • Tandem-axle EZ Loader® aluminum trailer
  • NMMA® certified trailer
  • DOT approved
  • Tandem-axle brakes
  • 13" (33.0 cm) radial tires w/galvanized V5 wheels & galvanized axle
  • Oil bath hubs
  • Leaf spring suspension
  • Heavy-duty winch w/nylon strap & safety strap
  • Stainless steel hardware
  • Galvanized steel components
  • LED lighting
  • PVC loading guides
  • Composite fenders

Show More…

Find a Mako Dealer Near You

Advertisement

Mako 204 CC Specifications

Boat Details

Year
2019
Type
Power
Class
Center Console, Saltwater Fishing
Length
20 ft 4 in
Hull Material
Fiberglass

Measurements

LOA
20 ft 4 in
Beam
8 ft 4 in
Max Draft
1 ft
Dry Weight
2635 lb
Deadrise at Transom
18°

Propulsion

Standard Engine

Number of Engines
1
Engine Type
Outboard

Accommodation

Max Passengers
8

Tanks

Fuel Tanks
87 gal

Other Details

Hull Shape
Deep Vee
Show More
Mako Boat image

Find a Mako Dealer Near You

Advertisement
Advertisement

Related New 2019 Mako boats

Find a Mako Dealer

Contact the Dealer

X