Menu
Close

Nordhavn 86

Request Price

Taking advantage of the enormous capacity of this hull, the Nordhavn 86 offers accommodations that are nothing short of remarkable. The saloon and galley measures 36 feet in length, the master cabin and head are full width consuming the whole forward/upper section of the vessel and the combination of wheelhouse, captain’s cabin and sky lounge measure almost 30 feet in length. In addition to the master stateroom and captain’s cabin, the vessel includes three guest staterooms with ensuite heads and an additional crew cabin and head aft with an interior and exterior entrance. A laundry and utility room are also provided. The luxurious and functional interior is finished with fine hardwoods, beautiful moldings and raised panels combined with stone floors, granite countertops, the finest hardware, lighting and fixtures.

The Nordhavn 86 is designed for customization, and most owners elect to engage professional interior designers. Some suggest alterations to layout, but all use furnishings, textures and colors to imprint owners’ personalities and tastes. Thus, each of the yachts launched to date is, effectively, unique. Finishing choices also result in interiors with remarkably different appearances and “feel”.

Construction of the N86 is conventional fiberglass, built to extremely heavy scantlings using beautifully constructed female molds for the entire hull and deck. Starting with a seamless, flawless structure, a highly detailed gelcoated finish possible only with this molding process, she will then receive a complete Alexseal paint job prior to assembly. A combination of the highly detailed molding and the superior luster and maintainability of the Alexseal paint will result in a yacht finish that is to the highest possible standard. Designed and built to the latest international standards, each new Nordhavn 86 can be built to ABS certification with +A1 Yachting Service rating for the hull and AMS rating for machinery and installation as an option.

Twin MTU Series 60 engines rated at 600 hp each spinning 48-inch propellers through 4.59 to 1 reduction gears allow a transatlantic cruising speed of 10 knots. With over 7,000 gallons of fuel aboard and throttled back to the 9 knot range, this new design can run roughly 4,000 miles before refueling. This twin configuration includes integral skegs and two large attached rudders for maximum directional control and propellers that are protected within their own apertures. The advanced high-pressure, common rail, electronically injected engines are fitted with wet exhaust, commercial rated transmissions with large reduction gears and offer efficiency and reliability never before possible.

An extensive list of standard machinery details includes central hydraulics with 20-square-foot stabilizers, 50 hp bow and stern thrusters, hydraulic bilge pumping and anchor wash downs, dual Onan generators, a universal AC electrical system for world wide use, 3,500 lb. Marquipt davit, chilled water air-conditioning system, 2000 gallons per day water maker, automatic engine room and lazarette fire system with ventilation dampeners, an on-deck Jacuzzi and much more. There’s little to add to the Nordhavn 86 except electronics and tenders.

General

  • Cushions throughout boat per PAE drawing of buyer’s choice of ultra leather or fabric
  • Interior steps to all teak. Corner of steps to have nonskid varnish
  • Interior lockers and drawers to be locking Timage with chrome push button
  • Interior overhead panels – Majilite Destiny Parchment #JHD6S. Removable, held in place by Velcro
  • Interior door lock sets to be Mobella “Mc Coy” chrome brass
  • Interior cabin doors to have rubber gaskets for sound reduction and door hooks
  • Hanging lockers to have automatic interior lights controlled by micro switch. Lined with Cedar
  • Solid (non louvered) cored doors for heads and staterooms 1.25″ (3.2 cm) thick with rubber gaskets on door jambs
  • Interior teak woodwork including cabin sole in pilot house to be varnished with 60% gloss varnish
  • Salon tables, pilothouse table to be varnished with high gloss varnish
  • All hand rails to be teak
  • Structural bulkheads dividing staterooms and heads to have 3/4” (1.9 cm) furring strips on each side to allow application of 3/4” (1.9 cm) thick sound insulation. The finished bulkhead material of 3/8” (9.5 mm) thickness to be applied over this
  • Mirrors are located thru out vessel as shown on interior drawings
  • All drawers to have stainless steel ball bearing slides

Galley

  • Sub zero #700TCIR and #700TCIL refrigerator/freezer with teak panels x two (2). One right hand hinge and one left hand hinge
  • Sub zero #700TF L freezer with teak panels located across from galley fwd. of day head – left hand hinge
  • Counter top: Granite with bull nosed edges
  • Flooring: Ceramic tile or stone
  • Cabinet paneling: All teak
  • G.E. Profile Stainless steel drop in electric range #JD968SFSS with custom stainless steel sea rails and pot holders
  • Locker and drawer interior finish: Formica white
  • GE “Advantium” #SCA1001DSS microwave oven with exhaust blower
  • GE Profile #GCG1540FSS 15″ (38.1 cm) stainless steel trash compactor
  • Dishwasher 24″ (61.cm) Bosch #SHV6803 stainless steel
  • Garbage disposal Insinkerator 3/4 hp #444SS
  • Stove alcove to be lined with Stainless steel
  • Lift up galley partition to divide galley from dining room
  • Pantry to starboard of galley
  • Sliding doors to galley to have frosted glass panels

Main Salon

  • Floors: Carpet with 2 lb,/sq.ft 1/2″ (1.27 cm) thick Soundown underlayment pad
  • Cabinet/paneling: Varnished teak
  • Teak table between chairs on port side
  • Furniture: Two (2) movable chairs with two (2) ottomans
  • Locker interior finish: Teak
  • Teak wrapped stainless steel support column at fwd. End of settee
  • Aritex lift for 50″ (127 cm) flat screen TV on port side of salon. (TV not included)
  • Prewire for surround sound speakers
  • Teak valance/air con soffit P&S and aft sides of salon
  • Two overhead teak hand rails
  • Two (2) Teak coffee tables starboard side with high gloss varnish
  • Settee along starboard side with storage under
  • Mullions along port and starboard side for installation of widow treatments
  • Overhead to have perimeter recess with strip lighting

Master Cabin

  • Floors: Carpet with 2 lb./sq. ft. 1/2″ (1.27 cm) thick Soundown underlayment pad
  • Cabinet/paneling: Varnished teak
  • Hanging locker interior finish: Cedar wood
  • Alcove for flat screen 42″ (106.7 cm) TV. (TV not included)
  • Vanity/desk with chair
  • Lounge chair
  • Mattress: Standard king size
  • Hanging lockers to be cedar lined with full length mirrors on inside of doors
  • Book shelves and night stands next to bunk
  • Teak headboard frame

Master Head

  • Floors: Ceramic or stone tile to be specified with order
  • Counter top: Granite with bull nosed edges
  • Mirrors and towel bars: As shown on drawings
  • Walk thru molded FRP shower stall with frameless glass doors accessed from both heads
  • Cabinet/joiner work: All teak
  • Locker and drawer interior finish: Formica
  • Toilet paper holders and towel bars: TBD
  • Bath tube to have frameless glass doors
  • Acrylic bath tub: Kohler Tub enclosure to be tiled with buyers choice of tile or stone
  • Mirrored locker doors in tub enclosure.

Pilothouse

  • Floors: Teak – varnish
  • Cabinet/joiner work: Varnished teak
  • Countertops and instrument panel faces: Formica #939 dark gray
  • Hi-Low teak table at settee to slide in and out
  • Settee with chart drawers under
  • Helm seat – Three (3) Stidds 500N-2X2 Low Back “Slimline”. Vinyl and pedestal color are buyer’s choice
  • Chart table with Cantalupi “Rico” chart light
  • Locker interior finish: Formica
  • Book shelves and chart drawers and lockers as shown on PAE drawing
  • Drinks refrigerator under port side of settee – Isotherm Model #CR049NV567
  • Compass- Ritchie SS 5000 5″ (12.7 cm) mounted on teak block
  • Top of instrument console to be wrapped in black leather or ultra leather

Captain's Cabin Pilot House

  • Flooring: Carpet with pad
  • Cabinet/joiner work: Varnished teak trim
  • Locker interior finish: Formica
  • Mattress: Single 5″ (12.7 cm) foam
  • Desk with movable chair
  • Hanging locker cedar lined
  • Dresser with four (4) drawers and mirror over
  • Drawers under bunk
  • Overhead lockers and shelves over bunk
  • Mullions for window treatments on two windows

Sky Lounge

  • “L” shaped settee starboard side
  • Teak coffee table
  • Customer chairs and ottoman port side
  • Teak end table
  • Aritex lift system for 42″ (106.7 cm) flat screen TV. (TV not included)
  • Lockers and book shelves port side and stbd aft
  • Mullions for window treatment for all six windows

Show More…

Contact the Manufacturer

Advertisement

Nordhavn 86 Specifications

Boat Details

Year
2021
Type
Power
Class
Trawler, Mega Yacht, Motor Yacht
Length
86 ft 7 in
Fuel Type
Diesel
Hull Material
Fiberglass

Measurements

Length at Water Line
77 ft 11 in
Beam
24 ft
Max Draft
8 ft 2 in
Dry Weight
400000 lb

Propulsion

Standard Engine

Number of Engines
2
Engine Type
Inboard
Engine Make
Caterpillar
Power
600 hp

Tanks

Fuel Tanks
7000 gal
Fresh Water Tanks
900 gal
Holding Tanks
250 gal

Other Details

Hull Shape
Displacement
Show More
Nordhavn Boat image

Contact the Manufacturer

The manufacturer will reply to your request as soon as possible.

I agree to the Terms of Use and Privacy Policy.
Advertisement

Related Current Nordhavn Boats

Contact the Manufacturer

The manufacturer will reply to your request as soon as possible.

I agree to the Terms of Use and Privacy Policy.
X