Menu
Close

Palm Beach Motor Yachts PB45

Request Price

The PB 45 was developed from the mold of the popular PB 50 in response to client requests. Specific feedback resulted in a lower priced, entry level boat with more contemporary styling and family-focused robust finishes. As with all Palm Beach Motor Yachts there is no compromise on build quality or handling. The first PB 45 was launched in 2012 to exceptional interest from new and existing Palm Beach owners.

Built in Australia to the highest standards available, our factory enables all stages of construction to occur in one facility under the watchful eye of proprietor, Mark Richards. Utilizing solid works 3D design programs coupled with computerized CNC systems and state of the art tooling ensures precise construction.

Latest generation E glass, vinyl ester, epoxy resins and stitched multi-axial fabric over Corecell linear foam are used to provide a very strong, but lightweight hull and deck. All bulkheads and fixed furniture are structurally bonded to the hull and deck for superior strength and rigidity like a performance racing yacht. Each model is engineered with proprietary noise silencing materials and the exclusive Quiet Chine © hull to provide a tranquil environment while aboard.

Palm Beach uses Volvo marine engines and world-class equipment, but will build to client specifications if alternatives are preferred. All engine and ancillary equipment sit atop fully isolated and decoupled engine mounts to reduce noise and vibration. The engine room consists of loaded vinyl acoustic isolation panels, preventing noise from moving outside of the engine room into the boat’s living area.

Palm Beach Motor Yachts is always looking to the future to ensure we stay at the forefront of technology and design. We pride ourselves on perfection and refinement and this is reflected in the quality of our vessels.

 

Welcome to our beach.

Our range is inspired from leading edge yacht racing technology and Mark’s experience at the pinnacle of yacht racing in global competition. In applying these philosophies to the design of his classically styled range of motor yachts, he has created a range that offers so much more to the astute boat owner.

Stability and agility are paramount and uncompromised. A trip offshore in rough conditions delivers superb performance with a fine bow entry and warped hull, providing outstanding fuel consumption and comfortable cruising speeds. Maneuverability and ease of handling comes through hydraulic steering, electronic gear selection and optional bow/stern thrusters.

All engine and ancillary equipment sit atop fully isolated and decoupled engine mounts to reduce noise and vibration. The engine room itself consists of loaded vinyl acoustic isolation panels, preventing noise from moving outside of the engine room into the boats living area.

The internal fit out is not unlike that of a high tech racing yacht where the bulkheads and fixed furniture are structurally bonded to the hull and deck further reinforcing the strength and lightweight properties of the hull. When it comes to internal fit out, we offer owners with a choice of either our traditional finish dominated by polished Burmese teak in conjunction with handcrafted joinery or our Contemporary finish. While still using teak trimming, our Contemporary finish utilizes more soft furnishings and composite materials to provide a more modern feel while maintaining our high quality. The choice is yours and as with all Palm Beach Motor Yachts, the fit out is entirely custom to suit each owner.

Palm Beach Motor Yachts is always looking to the future to ensure we stay at the forefront of technology. We pride ourselves on perfection and refinement and this is reflected in the quality of our vessels.

Standard Equipment

CONSTRUCTION

- All bulkheads and fixed furniture are structurally bonded to the hull and deck for superior strength and rigidity

- All exterior strength steel fittings are 316 marine grade stainless steel

- Antifouling paint: colour to owner’s spec

- Enclosed hardtop - GRP double moulded with electric sliding windows (port, starboard & aft) using toughened glass

- Hull & superstructure is built using the latest technology in composite boat construction. E-Glass, Corcell® and Airex® foam, Duflex paneling, stitched multi-axial fabric, vinylester and epoxy resins are used to produce an extremely strong and lightweight hull.

- Hull colour: Cream (standard)

- Watertight collision bulkhead located in the bow

ENGINEERING

- Acoustic engine sound shield

- Air conditioning units: 2x 18,000 BTU self-contained

- Anti-vibration mounts on engine supports

- Bilge Pump: Automatic 100L/min with manual override (3)

- Composite skin fittings & ball valves, double clamped on all through hull fittings on or below the waterline

- Electric trim tabs with indicators

- Fuel tank, integral composite with gauge at helm 

- Internal seawater strainers for main engines, generators and air conditioning intakes

- Fuel shut off valves

- Holding tank with macerator and dockside discharge

- Horn 24V Electric

- Pressurized fresh water system

- Racor fuel/water separator

- Hot water heater, 50L

ELECTRICAL SPECIFICATIONS

- AC outlets

- Custom 24V and 240V 110V distribution panels with amp and volt meters

- House batteries: deep cycle AGM

- Engine start batteries: AGM

- Battery paralleling system for emergency engine starting

- Battery switches electronic isolators

- Genset start battery: AGM

- Shore power inlets: 1 x 50A/240V

- Generator, Fischer Panda 10,000i 2 Phase mounted on subframe and installed with gas water separator for noise reduction

- DC battery charger 30amp x 24V

- Inverter, 2,000 watt / charger 50amp x 24V

- Engine monitors including instrumentation, alarms & hour meters

- LED Navigational lights (international standard)

- Premium quality tinned stranded copper wiring

COCKPIT & EXTERNAL

- Stainless steel anchor

- Electric anchor windlass with remote at helm

- Bow roller, stainless steel - self launching

- Cockpit cover

- Cockpit shower with fresh hot/cold water

- Cockpit wet bar with Silestone countertop with AC/DC refrigerator, freezer, sink, storage

- Designated glassware cabinet

- Dock lines (6) and fenders (3) with covers

- Extended teak swim platform

- Large anchor locker

- Fresh water washdown (bow)

- Gas struts on all deck hatches

- Hatch and windscreen covers

- Mooring cleats stainless steel—aft quarter, mid, & bow

- Navigational mast

- Forward facing cockpit seat

- Stainless steel handrails

- Teak cockpit floor & teak swim platform

- Transom flag with varnished flagpole

- Marine-grade upholstery with Sunbrella canvas covers

SALOON

- Custom carpeted saloon with acoustic underlay

- Custom ultraleather upholstery: owner’s choice of colour

- Interior arrangement to owner’s spec

- LED overhead lights

- Solid teak cabinetry with satin finish

- Storage lockers positive locking hardware

- Teak, high-gloss varnish, removable table

HELM

- Ergonomically designed helm station, electronic instrument panel, teak steering wheel and custom helm seating

- Windscreen, clear tempered glass with (3) E-type pantograph wipers, 24V motors with synchronized variable speed control and fresh water washers

GALLEY

- Stainless steel microwave/convection oven

- LED overhead lighting

- Refrigerator AC/DC compatible

- Under-bench recessed disposal bin with Silestone cover

- Solid Silestone countertop incorporating a recessed stainless steel sink, designer faucet

- Plate rack with cupholders

- Water purification system

ENTERTAINMENT

- Audio: BOSE Home Theater system and Blu-Ray DVD player with iPod dock

- Cockpit and saloon split Fusion speaker system

MASTER CABIN

- Custom tapered island berth with foam mattress

- Custom carpet with acoustic underlay

- Hanging locker with storage and mirrors

- Hull liner: owner’s choice of colour

- LED overhead lighting

- Premium quality custom upholstery

- Reading lights

- Solid teak cabinetry with satin finish

- Square Lewmar overhead hatch with privacy blind and screen

- Storage lockers with positive locking hardware

- Under berth storage drawers

HEAD

- Fully enclosed, traditional in design with contemporary finishes incorporating a solid Silestone vanity top, stainless steel above counter basin and designer faucet

- Mirror

- LED overhead lighting

- Shower stall with glass partition, frameless glass door and automatic sump pump

- Teak flooring

- Solid teak cabinetry with satin finish

- Square Lewmar overhead tinted hatch

- Storage lockers positive locking hardware

- Macerating porcelain head with teak seat

- Toilet roll holder, accessories and wall-mounted brush holder

- Towel rail, chrome (2)

SAFETY EQUIPMENT

- 2 x fire extinguishers

- Throwable life ring

- Flare kit

- First aid kit

- 8 life jackets

- 1 x boat hook

Show More…

Find a Palm Beach Motor Yachts Dealer Near You

Advertisement

Palm Beach Motor Yachts PB45 Specifications

Boat Details

Year
2019
Type
Power
Class
Motor Yacht
Length
45 ft
Fuel Type
Diesel
Hull Material
Composite

Measurements

LOA
49 ft
Beam
14 ft 8 in
Min. Draft
3 ft
Dry Weight
26455 lb

Propulsion

Standard Engine

Number of Engines
2
Engine Type
Inboard
Engine Make
Volvo
Engine Model
IPS
Power
400 hp

Tanks

Fuel Tanks
317 gal
Fresh Water Tanks
172 gal
Holding Tanks
24 gal

Other Details

Hull Shape
Semi-Displacement
Show More
Palm Beach Motor Yachts Boat image

Find a Palm Beach Motor Yachts Dealer Near You

Advertisement
Advertisement

Related New 2019 Palm Beach Motor Yachts boats

Find a Palm Beach Motor Yachts Dealer

Contact the Dealer

X