Dufour 382 Grand Large

Construction

• Hull: Hand-laminated in polyester/glassfibre.
• Decoration: Decorative stripes on the hull.
• Gelcoat: NPG gelcoat with first mat impregnated with NPG resin forming an optimum barrier against osmosis.
• Structure: Hull bottom counter-moulded, floors laminated into the hull.
• Deck: Sandwich with injected PVC foam core
• Ballast: Keel bolts bear on stainless back-plates
• Rudder: Semi-elliptical shape, filled with closed-cell epoxy foam.
• Stock Solid stainless steel.
• Non-slip deck surface: Non-slip structured deck surface.

Deck

• Shroud chain-plates: Single chainplate for cap shrouds and lower shrouds.
• Safety chainplates: Safety harness chainplates in cockpit floor
• Chainplates: 2 backstay chainplates
• Midships mooring cleats: 2, aluminium
• Mooring cleats: 4, aluminium.
• Rubbing strips: 6 stainless, on hull sheerline
• Fuel deck fillers: 1
• Water deck fillers: 2
• Chainplate on roof for Mainsail sheet
• Self tacking jib track with car.
• Through-deck fitting: Stainless swan-neck for electrical and electronic cables.
• Deck organizers: 2 deck organizers, 4-sheave (starboard ) and 5-sheave  (port ) for halyard, sheet, and reef line returns.
• Halyard winches: 2 halyard winches
• Jamcleats: 2 rows of jamcleats port / starboard level with the companionway
• Furler line jamcleats: 1 at aft end of sidedeck
• Polyester slidin hatch cover.

Cockpit

• Lockers: 2 large side lockers, lids fitted with gas struts and fixings for padlocks.
• Helm: Wheel
• Helm console: Polyester.
• Engine control: Engine controls and control panel at helm position.
• Compasses: 2 on columns
• Instrumentation: At helm position (port and starboard)
• Gas locker: Port aft locker
• Stern door: Swings up, with built-in telescopic stainless bathing ladder
• BIB locker: Life raft stows in dedicated locker fitted with ram below stern door.
• Shower: Cold water
• Shore supply : Watertight socket in cockpit
• Bathing ladder: Telescopic stainless bathing ladder
• Cockpit floor: Non-slip polyester cockpit floor.
• Emergency tiller: Head of rudder stock beneath helmsman’s floor for fitting the emergency tiller

Galley

• Configurations: Longitudinal or L-shape, depending on version
• Worktop: ‘Corian®’ synthetic resin with wooden fiddle.
• Sink: Stainless, twin bowls with GCorian®C synthetic resin covers, one of which can be used as a chopping board
• Water: Hot and cold pumped water with chrome-plated brass single-lever mixer tap.
• Gas cooker: 2-burner cooker with oven on gimbals, and removable folding protective cover in ‘Corian®
• Crockery storage: Dowels to retain crockery when heeling.
• Refrigerators: 12 V electric refrigerator
• Storage depending on version
• Waste bin: Sort compartments

Rigging and Sails

• Mast: Anodized aluminium with 2 levels of swept spreaders
• Rigging: 9/10 fractional
• Mast stepping: On deck
• Lights: Navigation, anchor and masthead lights.
• Topping lift: Boom topping lift cleat
• Boom: Anodized aluminium fitted with 2 continuous reefers.
• Furler: Genoa roller furler.
• Standing rigging: Continuous in stainless single-strand cable, chrome-plated bronze rigging screws, comprising: forestay, twin backstay, inter. and lower shrouds.
• Running rigging: Running rigging in pre-stretched textile including: main and genoa halyards, boom topping lift, main and jib sheets, 2 continuous reef lines, leech tensioner, furling line, downhaul tackle.
• Mainsail: 2 wide reef strips, with battens and bag.
• Genoa: Furling genoa with UV-protection.

Disclaimer

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.