Available to Order:  Fort Lauderdale The Ocean Craft Marine Beachlander is a unique rigid hull inflatable boat applicable for an array of uses. The opening bow allows for direct water entry and dry beach access. Add optional amphibious technology for the capability to drive directly onto the beach. With a PAX rating of 15, ideal uses include shuttling resort guests, special need and wheelchair access, diver entry and exit, and safe and convenient family swimming. The reverse chine design redirects water flow to provide an exceptionally dry ride and additional lift with reduced drag. The Ocean Craft Marine Beachlander 8.75 has a maximum power rating of up to 600 HP, with 350 HP recommended. This nimble tender reaches speeds up to 62 mph and is rated B-Offshore. The hull construction is available in both fiberglass or aluminum, each delivering durability. Choose air filled or foam filled tubes, and inboard or outboard engines. Seating configurations are completely customizable and include bucket seats, leaning posts, benches, jockey seats, and shock mitigating seats. Other options include a fixed T-top, a Bimini top, a self righting frame, bow or stern posts, several console options, and cabin options.   We’re proud to showcase Ocean Craft Marine at all our Florida showrooms, including: Dania Beach / Ft. Lauderdale, Palm Beach, Sarasota, and Tampa Bay.

Customizable Boat:  Fort Lauderdale The Ocean Craft Marine 9.5M RHIB Professional Grade Search and Rescue is a 31'10 inflatable "no failure" craft. Powered as standard with twin Mercury Verado 350 HP outboards, these craft travel up to 65 knots and carry up to 15 PAX. Incredibly dynamic, these RHIBs have a load capacity of 1.5 tons and can run in as little as 3.3 ft. The surface effect hull provides a stable and comfortable ride with the ability to maneuver high speed, tactical turns in rough sea conditions. These vessels are designed to perform safely in even the worst conditions. Standard features include a red non-skid deck and hull, a military grade tube set in red, triple fendering rub rails, exterior and interior safety lines, molded rubber handles, a stainless steel transom strip, an anchor locker, three U bolts on bow and transom, four stainless steel heavy lifting points, aft athwartship bench seating, and a 12V marine electrical distribution system. Optional features include a hull barrier coating and anti-fouling bottom paint, diver doors for easy deployment and recovery of divers and injured persons, molded diver notch handles topside and underneath, neoprene step treads, a custom name stenciled on tube set, a ballistic two-person console, a 90-gallon aluminum fuel tank, a Sunbrella console cover, a full boat protective cover, jockey-style straddle seats with grab handles and covers, an anchor and rode, a rescue basket, a black powder coated outboard motor guard, a black powder coated stainless steel aft A frame arch, heavy duty forward and aft tow posts, a triple bank battery charging system, two automatic bilge pumps, 12V DC receptacles, a signal horn, a Garmin 210 or 210i VHF radio, a VHF antenna and mounting base, a lighted compass, a Garmin infrared rear facing camera, a FLIR thermal camera, an aluminum stepped deck, and an aluminum  protective bow encapsulation. *Prices do not include freight costs.   We’re proud to showcase Ocean Craft Marine at all our Florida showrooms, including: Dania Beach / Ft. Lauderdale, Palm Beach, Sarasota, and Tampa Bay.

Customizable Boat:  Fort Lauderdale The 26'11 Ocean Craft Marine Fire-Fighting 8.0M craft surpasses all operational requirements for rescue and fire-fighting missions and is powered as standard by twin Yamaha F115 HP outboards. It is capable of speeds up to 59 knots and has a 15 persons capacity. Fully customizable, the OCM Fire-Fighting craft uses the Godiva Power Flow fire fighting pump and accessories to pump up to 350 gallons per minute at 10 bar pressure and 9.8 feet of lift from directly below the hull for an unlimited supply of water. Standard features include red tubes and hull color, triple fendering rub rails, an exterior safety line, an interior safety line, molded rubber handles, stainless steel heavy duty lifting points, navigation and anchor lights, two automatic bilge pumps with float switches, a stainless steel transom strip, an anchor locker, and three U-bolts (1 on the bow, two on the transom).   We’re proud to showcase Ocean Craft Marine at all our Florida showrooms, including: Dania Beach / Ft. Lauderdale, Palm Beach, Sarasota, and Tampa Bay.

Customizable Boat:  Fort Lauderdale The 9.5M Beachlander by Ocean Craft Marine is an amphibious tender that allows direct driving access to the beach or remote islands. With a maximum power rating of 600 HP and a recommended rating of 350, the Beachlander reaches speeds of over 50 knots. It has the capacity to carry 15 passengers on the water and 8 on land, making it a fantastic guest transport tender or boat for crew activities. The bow of the Beachlander opens for direct dry access to the beach for easy boarding and unloading, easy dive entry and exit, and safe swimming opportunities for families. The combination of amphibious capabilities and an opening bow provides unprecedented ease of access for guests to the beach. The amphibious system is fully marinized and consists of four motorized, retractable wheels that power the boat onto beaches, remote islands, up boat ramps, and allow easy storage next to beach houses. Crafts with amphibious technology require only one operator as anchoring at the beach and trailering are not necessary. Highly customizable, the Ocean Craft Marine can be fitted with many options to suit any program. Choose from an aluminum or fiberglass hull, foam or air filled tubes, inboard or outboard engines, bench seats, bucket seats, jockey seats, leaning posts, shock mitigating seats, a T-top, a Bimini top, console options, a self-righting frame, or bow and stern posts.   We're proud to showcase Ocean Craft Marine at our east coast Florida showrooms, including: Dania Beach / Ft. Lauderdale and Palm Beach.

Customizable Boat:  Fort Lauderale The Ocean Craft Marine Transport and Tour 9.5M is a rigid hull inflatable boat with USCG Sub-Chapter T certification. With a recommended power of 400 HP and 700 HP maximum, the 9.5M Transport and Tour travels at speeds up to 65 knots. This tender is suitable for transporting guests, sightseeing tours, eco-tours, dive excursions, or as a commcercial crew boat with up to 15 PAX. Available as an option are fully-retractable amphibious wheels. The amphibious capabilities allow direct beach access and the ability to traverse various terrains. Drive directly onto the beach, up to a beach house, or onto a boat ramp without a trailer. This unique design requires only one operator, as no anchoring or trailering is necessary. The OCM RHIB hull is designed with a reverse-chine to deflect sea spray for a dry ride. This design also increases lift and speed while reducing fuel consumption. The Transport and Tour delivers a smooth, stable ride along with agile maneuvering capabilities. Highly customizable, the Transport and Tour 9.5M is available with many different layout options and features. Choose from air or foam filled tubes, an aluminum or fiberglass hull, a T-top, a Bimini top, bench seats, jockey seats, leaning posts, bucket seats, shock mitigating seats, console options, cabin options, a self righting frame, or bow and stern posts.   We’re proud to showcase Ocean Craft Marine at all our Florida showrooms, including: Dania Beach / Ft. Lauderdale, Palm Beach, Sarasota, and Tampa Bay.

Customizable Boat:  Fort Lauderdale The Ocean Craft Marine SOLAS Rescue 6.5M is a 22' tender which reaches SOLAS standards and is ideal for yachts and commercial ships which require such safety standards. Available with a single-point lifting frame or a four-point lifting frame, the SOLAS Rescue 6.5M craft is a B-Rated offshore vessel. Recommended power is 115HP with up to 250HP maximum. This craft travels at speeds up to 50 knots. The hull of the SOLAS rated craft delivers a stable ride, shock absorption, a high load carrying capacity, and responsive control. Standard features include Hypalon tubes, orange hull, tube, and deck color, a bow step and anchor guide, jockey straddle seats, a search light, keel guard, a radar reflector, a SOLAS approved fire extinguisher, a front tow post, a self-righting system, a double console, an anchor and rope. *Base price listed. Fees apply for optional features.     We’re proud to showcase Ocean Craft Marine at all our Florida showrooms, including:   Dania Beach / Ft. Lauderdale, Palm Beach, Sarasota, and Tampa Bay.  

Customizable Boat:  Fort Lauderdale The Ocean Craft Marine 8.4M Amphibious is a versatile and unique tender with power recommendations of 200 HP. Its four independently motorized, retractable, and steerable wheels allow an easy transition from shallow water to shore, and make it the ideal tender for a luxury motor yacht. At 27 feet, the 8.4M Amphibious Ocean Craft Marine carries up to 15 passengers in the water and 8 on land. Its fully retractable wheels don't compromise its agility, with top speeds reaching over 40 knots. The 8.4M Amphibious craft is highly customizable to suit the needs of any program. Choose from a fiberglass or aluminum hull, air or foam filled tubes, inboard or outboard engines, several console options, bucket seats, benches, leaning posts, jockey seats, shock mitigating seats, cabin options, a T-top, a Bimini top, a self-righting frame, or bow and stern posts. This amphibious craft is ideal for transporting guests to shore, for water sports, and for crew activities. Unload passengers directly on the beach for a dry exit or entry. Only one crew member is necessary for operation, as it can be driven directly onto the beach or up a ramp; no need for anchoring or trailering. Access the most shallow waters or traverse shallow-water submerged and variable objects. The 8.4M Amphibious craft is ideal for a variety of applications and provides the features that any reliable yacht tender requires. *Base price listed. Fees apply for optional features.     We’re proud to showcase Ocean Craft Marine at all our Florida showrooms, including:   Dania Beach / Ft. Lauderdale, Palm Beach, Sarasota, and Tampa Bay.  

Customizable Boat:  Fort Lauderdale The Ocean Craft Marine 7.1M Amphibious is a rigid hull inflatable boat with 4WD amphibious technology. Four independently motorized, retractable, and steerable wheels power the boat, providing off-water capabilities. A reverse-chine hull shape delivers a stable and dry ride with optimized lift and minimized drag. Recommended power is 150HP. With a B-Offshore rating, this RHIB has a rating of 9 persons on the water and 8 on land. The 7.1M Amphibious is ideal for commercial, recreational, and rescue applications. Standard features include Arctic Gray tubes with red accents, a rub rail, a white colored fiberglass hull, an anchor locker, three U-bolts, stainless steel heavy duty lifting points, forward Sampson post/bollard, LED navigation lights, a signal horn, automatic electric bilge pumps, and a 12V DC electric system. Choose from an aluminum or fiberglass hull, air or foam filled tubes, or inboard or outboard engines. Seating arrangements are customizable and include bench seats, leaning posts, bucket seats, jockey seats, and shock mitigating seats. Add an optional T-Top, Bimini top, or cabin and choose from several console options. Also available are self-righting frames and bow and stern posts. The four independently motorized wheels provide unparalleled efficiency and opportunity, not offered by any other boats in its class. The amphibious technology allows for straight driving onto any beach, shallow water accessibility, entry in previously inaccessible areas, rapid transition between land and water, unique flood response capabilities, and the ability to traverse submerged obstacles and varying depths.   We’re proud to showcase Ocean Craft Marine at all our Florida showrooms, including: Dania Beach / Ft. Lauderdale, Palm Beach, Sarasota, and Tampa Bay.