The 37 footer capitalizes on the innovations of the seventh generation of Oceanis cruisers, which it completes. The Oceanis 37.1 is the eighth model launched since 2017 and it has all the line’s hallmarks and offers eco-friendly solutions like an optional electric motor or iroko slatted cockpit floor. The outdoor space is very open, with an absence of back stays – a layout used successfully on the Oceanis 30.1 and Oceanis 34.1. The generous double spreaders on the Oceanis 37.1 promise excellent performances. To retain easy handling shorthanded, all the rigging is brought back to the two aft winches. Only the halyards remain grouped around the coachroof. All the instruments, including a 7-inch plotter can be found on the starboard helm console.The hull is flared with a rib giving it fluid lines below water and achieving greater power and stability. It also improves the hull rigidity, controls the weight well, and provides greater volume inside the bow. The Oceanis 37.1 cruiser’s volume is remarkable. The generous space in the saloon is nearly as large as a 40 footer. TThe saloon is offset to port with a sofa for relaxing and a comfortable table for six, facing the lengthwise galley. The fore cabin has a breathtaking view of the horizon through two large portholes integrated in the hull side. In the two-bathroom version, the bed is positioned against the starboard hull and is of generous proportions. Comfort at the stern is optimal. In the standard version, there is a king-size double bed and a huge sail locker can be accessed from inside or out.

Sleeker, lighter, with more sail area, and more space in the bow than its predecessor for the owner’s cabin, the Oceanis 34.1 promises unforgettable days out on the water. Once again, Marc Lombard and NAUTA Design have combined their efforts to produce a unique design concept, true to the spirit of the 7th generation Oceanis range. The deck layout has been redesigned to ensure maximum comfort and safety when moving around the boat, taking the helm and for onboard living when at anchor. The ropes for the halyard and the furling system are forward of the cockpit while there is a winch on each side for the helmsman to set the foresails. The result is an uncluttered cockpit ideal for relaxation, with easy access to the aft swim platform.

The Oceanis 30.1 is easy to sail but lively to helm and promises new experiences and thrills. This robust little smart cruiser is small enough to trail, opening up endless possibilities for sailing on lakes and rivers, as well as coastal sailing and high sea adventures.  With a stemhead and her hard-chine hull and well-proportioned sides and coachroof, the Oceanis 30.1 looks unashamedly like a small yacht. The Finot-Conq plan has met the double challenge of power and simple navigation. With her slender bow, optimized weight, stiff canvas and square-top mainsail, she performs well in all points of sailing. For beginners or for short-handed sailing, the self-tailing jib and the single winch make her easy to handle. For performance, the Oceanis 30.1 has a large overlapping genoa, a furling code zero and an asymmetric spinnaker. Aft, a step affords access to the sea and can be supplemented by a small lifting platform.  

The BENETEAU First 30 is a celebration of performance, comfort, and innovation—a perfect fit for the next generation of sailors. She delivers the sensation of planing, easy handling, safety and cruising comfort – a unique combination of qualities befitting the modern successor to the legendary 1977 First 30. Few sensations compare to the moment when a sailboat begins to plane—an exhilarating "lift-off" as the boat breaks free from the chains of displacement speed. Until now, this experience required advanced sailing skills. However, with the BENETEAU First 30, the joy of planing becomes effortless and accessible to all, whether you’re an experienced racer or a newcomer to sailing. The deck and generously sized cockpit layout were designed with two goals: minimizing clutter to create a spacious and comfortable chill-out area while ensuring outstanding sailing ergonomics. Two cockpit layouts are available: one for day sailors and cruisers and another for racers. In the cruising layout, the mainsail bridle and German sheet system enable the cockpit floor to be completely clean while allowing easy control of the mainsail through generously sized winches. The racing layout adds a mainsail traveller with a direct and fine-tuning mainsheet system, creating a familiar workspace for racing sailors.

The Oceanis 46 boasts all the features of a large cruising yacht, with a rare balance between elegance, usable space and performance. Her stepped hull opens up an incredible amount of space inside and yet her seakeeping performance is still impressive. A large number of clever customizable fittings make her easy to sail and pleasantly comfortable. The Oceanis 46.1 is based on a Finot-Conq plan, keeping the distinctive stepped hull of the 51.1. Apart from her performance at sea and the huge amount of space that set this boat apart, this architecture makes optimal use of the cockpit beam. An incredibly efficient deck plan makes her wonderfully safe and easy to use. The furling mast, self-tailing jib and all the halyards and sheets brought back to a single winch at each of the helm stations, make manoeuvring simple when short-handed sailing.

The Figaro BENETEAU 3 is the first production foiling one-design monohull ever to be designed. A distillation of technology and innovation, it results from a collaboration between group BENETEAU’s best experts and the Van Peteghem Lauriot-Prévost (VPLP) office, the architects of the two last boats to win the Vendée Globe. The prototype has been tested and the production of the boat has been launched.  It will enter the ISO/World Sailing design category A. The specifications define the FB3 monohull as being as reliable as its predecessor, the FB2.  It is equipped with foils, a better performing ballast-free hull, a more slender and deeper keel, a setback mast and a more extensive and larger sail plan.

Following in the wake of her elder sister the Oceanis 51.1, this 40-foot cruiser, with a new hull design by Marc Lombard, offers unrivalled deck volume and interior space, an there are no concessions to performance. The 12-metre long Oceanis 40.1 is available in different layouts, draughts and rigs, adapting to the most demanding sailor’s cruising requirements and satisfying their need for comfort and pleasure under sail. With the innovative flared hull design of the Oceanis 40.1, and steps extending over a third of the bow, BENETEAU has broken new ground but made no concessions. The result is a hull that has true speed potential and is stiff under sail. Above the waterline, her deck plan and ultra-spacious interior by Nauta Design is unheard of on a boat this size. You cannot help feeling that you are aboard a 45 foot cruiser.

With taut lines, a stepped hull and a stylish deck plan, the Oceanis 51.1 is the first of a new generation. Easy to handle, comfortable and smart, the number of customizations available has been increased to provide more than 700 combinations. One third of the Oceanis 51.1’s hull is now stepped. In addition to the aesthetics of this flared shape, the new hull creates additional interior space allowing for exciting new layouts on a boat this size.  With emphasis on taut cruiser lines, she is a joy to move around and reassuringly safe. The spacious cockpit, many relaxation and sun bathing areas, as well as an aft swim platform, promise true comfort.