Interboat 17

Layout

The bow features an anchor locker set into the foredeck and a central mounted cleat, aft of this are the side decks with a non slip finish.

The cockpit features two main seating areas, forward seating for approximately six people with good high backrests and comfortable base cushions. Beneath the seats are large stowage areas that can fit personal items along with the infill cushions and boards. There is also a foldable teak table mounted in the centre of the seating which can be removed if not wanted.

Moving aft the engine casing is midships, this doubles as a superb table. To the rear of the boat there is a further seating area for three people in comfort and easy access to the steering and engine controls. 

The flooring of the cockpit has been upgraded to 10 mm solid teak.

The rear deck of the boat has a two cleats, navigation light and ensign staff holder. 

To cover the boat a spray hood is fitted forward on a self supporting stainless steel frame. The sides and front of the spray hood can be rolled up so the actual canopy becomes a forward sun bimini. To the rear a sturdy zipper is fitted to which the tonneau cover can be connected to protect the aft section of the boat when not in use.

Specification

• Rope fendering
• Spray hood with tonneau cover
• 2 zippers in front window
• Full set of cream cushions including sunbed infill cushions
• 3 stainless steel cleats
• 2 stainless steel cleats amidships
• 4 stainless steel fender hooks for fenders
• Stainless steel bow protection strip
• Stainless steel bow eye
• Solid teak flooring 10mm 
• 3 large storage areas forward                     
• Solid teak on the motor casing                  
• 2 teak boarding steps
• Removable teak folding table                    
• Anchor locker                   
• Stainless steel rudder and propeller protection
• Transom ladder                               
• Non-skid decks                       
• 12 Volt connection                         
• Navigation lights                              
• Manual bilge pump
• Fire extinguisher                             
• Sound insulated engine box
• Fuel valve
• Stainless steel fuel tank with tank indicator

Inventory

• 4 x Fenders
• 3 x Mooring Lines

Disclaimer

In this transaction we are acting as Brokers only. Whilst every care has been taken in their preparation, the correctness of these particulars is not guaranteed. The particulars are intended only as a guide and they do not constitute a term of any contract. A prospective buyer is advised to check the particulars and specification and where appropriate to have the vessel fully surveyed/trialed and inspected.