Ribcraft 7.8

DETAILS:

Extremely lightly used Ribcraft 7.80 Metre Length Overall x 2.70 Metre Beam Commercial specification solid GRP Rigid Inflatable Boat (2023) complete with 2 x Suzuki DF175APX outboards. (25hours)

• Commercial Specification Hypalon 866 inflation tubes
• External tube looped lifelines, with ‘D’ ring tube patches
• ‘D’ section rubbing strake fendering
• Anti-Slip decking
• Aft deck water collection sump
• Elephant trunk style deck drainers 4” minimum
• Stainless steel bow winch eye strong point and transom mounted towing eyes.
• 800 GPH automatic bilge pump wired to console, includes skin fitting, hose and carling switch.
• Foot pump and emergency tube repair kit
• Anchor locker, hatch and deck tie off cleat.

1 x Ribcraft Toughtec Keelguard running full length of the hull

1 x Stainless steel bow sampson post 3” tube

CONSOLE AND SEATING

1 x Pacific Double Console complete with access hatch, passenger stainless steel grab rail and spray windscreen including stainless wrap round steel grab rail

6 x One person jockey seat with hinged seat, stainless steel backrest with bolster and seat securing latch.

6 x Wing side supports for one man jockey seats

1 x Deluxe rear bench seat including, hinged seat, backrest with bolster and seat securing latch

1 x Powder coating to all Stainless steel bright work, ‘A’ frame, Screen rail and Backrests etc.

FUEL SYSTEMS

1 x Twin 180 Litre (360 litres in total approx.) stainless steel under deck fuel tank with water separating fuel filter, console recess filler, Perko filler with integrated breather, emergency shut of valve, electronic fuel sender and fuel gauge. (Twin 40 gallon)

A' FRAME

1 x Heavy duty stainless steel double ‘A’ Frame manufactured from 2” tubing. Mounted to transom. High tow point included for water-skiing.

TUBE ACCESSORIES

5 x Over Pressure Release Valves, One per chamber

1 x Reinforced tubes at bow, 200mm above ‘D’ section at the bow section and incorporating rubber roller fairlead for retaining anchor line.

6 x Wear patches bonded to tube using the Diamond antislip material

4 x Rubber grab handle bonded to tube

STEERING SYSTEM

1 x Twin Engine, twin ram “Seastar” outboard hydraulic steering system including helm pump, dual tie bar kit, engine ram, all hoses.

ELECTRICAL AND INSTRUMENTS

1 x LED Navigation lights wired to console with carling switch (Port, Starboard and all-round white. The all-round white can be individually illuminated via the two position switch)

1 x Ribcraft ETA Circuit Breaker electrical distribution box with battery isolator, bus bar and ETA circuit breakers (6 way)

1 x upgrade of the above distribution boxes to incorporate a Twin battery system with change over switch

1 x Plastimo 105 console mounted offshore compass (illuminated)

1 x 12V Bulgin IP68 power socket, wired and mounted to console with spare plug.

1 x Scanstrut Dual USB outlet

GPSMAP 8412xsv with Worldwide Basemap and Sonar

1 x GT54UHD-TM Transducer

1 x NMEA 2000 integration to plotter

1 x Icom M423GE VHF/ DSC Radio with Procom Aerial and flush mount kit. (built in GPS receiver)

MARINE AUDIO

1 x Fusion 300 Series Black Box Source Unit incl. MS-NRX300 Wired Remote and USB/3.5mm connection cables

1 x Fusion 7” speakers

MISCELLANEOUS 

1 x Stainless steel engine bolt lock fitted

1 x 1kg fire extinguisher housed in console GRP recess

ROAD TRAILER

Rapide R4B79 Twin axle multi roller coaster trailer

ENGINES

2 x Suzuki DF175APX Outboards, Twin engine, Double console include the supply of-

2 x Marine batteries, cables, battery housings and ISO 7840 fuel line.