Stealth 46M ARV
Contact Seller
XPresented For Sale By:
Ocean Independence - Europe
Switzerland
| Make | Stealth |
|---|---|
| Model | 46M ARV |
| Year | 2024 |
| Condition | New |
| Price | €32,000,000 |
| Type | Power |
| Class | Cruiser (Power) |
| Length | 151 ft |
| Fuel Type | Diesel |
| Hull Material | Aluminum |
| Location | Southampton, Hampshire, United Kingdom |
| LOA | 150 ft 11 in |
|---|---|
| Beam | 29 ft 2 in |
| Electrical Equipment |
|
|---|---|
| Electronics |
|
| Inside Equipment |
|
| Outside Equipment/Extras |
|
| Guest Heads | 7 |
|---|
Description
STEALTH 46M ARV
The STEALTH 46M anti radar vessel is a design that will appeal to a client looking for something very unique. The styling is bold and takes its cues from current naval requirements. The design also allows for class-beating interior volume.
At this stage this is a project from the board of world renowned Naval Architect Peter Bolke who over the years has been behind numerous large power and sailing yacht designs based with the hugely successful Dubois design house.
Principal Dimensions:
o Below 500GRT
o Aluminium or Medim Tech Composite construction (not steel)
o Semi-displacement form to be efficient at cruising speeds
o Restricted installed power for good hull speed efficiency range
o Maximised running length for efficiency
o Box Dimensions 46.0m x 8.9m x 2.3m
Hull features:
o Maximized parallel body for build efficiency
o Underwater – run aft inflected to horizontal F55 – allowing parallel transom platform extension.
o Hull bottom inflection maximised to allow low installed shaft angle
o Maximise running length for efficiency – full LOA
o Thruster openings – hydrodynamic fairing and detailing
o Options for zero speed stabilization
o Long keel extent for directional stability
o Moderate hull flair forward – small chine knuckle intersecting waterline
o Skin fittings – either above knuckle in vertical topside or below knuckle in hull bottom
o Flat stem
The design incorporates not only a unique styling concept but also attention to detail has been given to the hull form, power train and ancillary equipment to improve efficiency and space for a given size.
The designer and Ocean Team are available to discuss this project in more detail and also offers the new owner significant flexibility and customisation on the interior and options. The build could be achieved here in the UK or at various yards in Europe or Italy.
The interior could also be offered a blank canvas for your interior designer of choice to produce something both spectacular and of course totally unique to you.
In way of lazarette – hull topside platform extends aft far enough to allow walking around the aft quatre buttress – so access to the stern steps.
No additional steps required.
o Platform is also useful to extend beach-club facility.
Machinery and tankeage proposal
Peter Bolke Design No. P0717
Yard No. TBA
Length Overall, LOA 46.00
Length Perpendiculars, LPP 46.00
Breadth (Max) 8.9
DWL Draft to Baseline –(USK) 2.3
Depth to U/S Canoe Body (ICLL) 2.00
Draft (Scantling) (ICLL) 2.3
Summer Loadline Freeboard (ICLL) 2.663
Maximum Displacement in SWL Condition 370
Speed Max (cruising) kts 16 - 13
Range 4,800 nm
ITC Gross Tonnage 499
Area of Operation Unlimited
Standard of Survivability REG Code – (MCA LY3)
Number of Crew 8
Number of Guests 10
Type Twin Screw Motor Yacht
Installed Power 2 x 1200hp
Electrical Generation 2 x 125kW
Type Twin Screw Motor Yacht
Tankage:
Diesel Fuel 50,000 litres
Fresh Water 15,000 litres
Black / Grey 13,000 litres
Auxiliary 5,000 litres
Disclaimer
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
Presented For Sale By:
Ocean Independence - Europe
Switzerland
Presented For Sale By:
Ocean Independence - Europe
Switzerland
