Lagoon 400 S2

Description provided by manufacturer

After seeing over 260 boats built in three years, the Lagoon 400 (launched in 2009) has found a new lease of life through Nauta Design's work on the boat's interior fittings. Suggestions received from owners have enabled Lagoon to produce a boat that is even more welcoming, with a greater level of comfort, and resolutely modern: the result is the Lagoon 400 S2, a nod to its famous predecessors, the Lagoon 410 S2 and 380 S2. 

Like its predecessors, the Lagoon 400 S2 is designed for coastal or ocean cruises. It can comfortably accommodate 8 with its 3 or 4 double cabins, elegantly fitted, spacious interior, and her cockpit and salon on the same level. 

Construction

• Composition: high quality polyester and anti-osmosis resin
• White gelcoat infused balsa core
• Solid infused hull bottom
• Vacuum laminated balsa bridge and cot infused
  with high quality anti-osmosis resin and balsa.
• Solid casting mould and sandwich hull
• Laminated or adhesive bulkheads

Deck

• 8 mooring cleats
• 1 12V 1000W vertical electric windlass on bridge
  with 10mm gypsy
• Nylon center line
• Stainless steel pulpits at stern
• Stainless steel pulpits at stern, one with
  horseshoe buoy and pavilion
• Composite compression beam with anchor
  emplacement and cleat.
• Aluminium bow pulpit with anchor point and
  Genoa furler, anchor roller, and navigation light.
• Stanchion
• 2 stainless steel lifelines on gunwale
• 3 stainless steel lifelines on stern pulpit
• Stainless steel handrail on sides of coachroof.
• Stainless steel handrail on Bimini posts

Cockpit

• Cockpit can be used as bridge living area, access to sea via gangway that also provides access to transoms
• Rigid Bimini with lighting provided by 3 spotlights
• Self-emptying cockpit with wooden duckboards
• port helm on coachroof bulkhead includes: engine controls, engine instrument panel, electronics area, steering wheel with chafe guard and brake, double bench, access stairway from cockpit with stainless steel banister,pocket,
  footrest
• Rope steering system, rudder blades with stainless steel spindles, emergency tiller handle
• Bench to starboard side
• Varnished cockpit table interchangeable with galley coffee table
• 1 box under stern bench
• 1 generator technical cupboard under bow bench (generator optional)
• 1 gas cabinet under starboard bench
• 1 Storage area under portside Lazy boy,storage for 1 bottle of gas

Accommodations

Bow port cabin

• Accessed through door from port passage
• Headroom: of around 2.08m
• Lighting with 2 x 12V spotlights
• 2 x 12V spotlights at headboard on ceiling
• Convertible double/2 single bed(s)
• double bed 2.06m x 1.76m x 1.16m at foot.
• 2 single beds 2.06m x 0.69m x 0.58m at foot.
• Drawer and two storage units on front of bed
• 1 under-bed storage unit
• Storage at foot of bed
• 1 wardrobe
• 1 round deck hatch with blind
• 1 opening hull porthole with privacy curtain.
• 1 large hull window with privacy curtain

Bow port toilet

• Accessed through door from bow cabin
• Lighting with 2 x 12V spotlights
• Headroom: around 2m
• Large manual marine toilet (space for optional sewage tank)
• polyester sink with pressurised mixer tap
• Composite shower duckboard
• 1 shower head
• 1 round stainless steel towel rack
• 1 double peg
• Shower drained by 12V pump
• 1 round deck hatch with blind
• Toilet paper holder under sink
• 1 high unit with 2 mirrors and shelves
• 1 toothbrush holder above sink

Stern port toilet

• Accessed through door from stern cabin
• Lighting with 2 x 12V spotlights
• Headroom: around 2m
• Large manual marine toilet with sewage tank as standard
• polyester sink with pressurised mixer tap
• Composite shower duckboard
• 1 shower head
• 1 round stainless steel towel rack
• 1 double peg
• Shower drained by 12V pump
• 1 round deck hatch with blind
• Toilet paper holder under sink
• 1 high unit with 2 mirrors and shelves
• 1 toothbrush holder above sink

Stern port cabin

• Accessed through door from port passage
• Headroom: of around 2.00m
• Lighting with 2 x 12V spotlights
• 2 x 12V spotlights at headboard on ceiling
• Front and side access bed, 2.00m x 1.44m x 1.00 at foot
• Drawer under bed
• Battery isolating switch accessible behind door on front of bed.
• Bedside unit on port side
• Wardrobe
• 1 round deck hatch with blind
• 1 opening hull porthole with privacy curtain.
• 1 large hull window with privacy curtain

Galley

• Large galley with panoramic view, sliding bay window with lock
• Headroom in galley: 2.13m
• 12V LED spotlights
• 5 seat L-shaped bench
• 1 slide-out chair for map and dinner table
• Varnished wood coffee table interchangeable with large cockpit table (with set of long aluminium legs and short aluminium legs)
• 3 storage units under bench
• 2 panels open on to bow coachroof windows

Engines

• Accessed via gas powered panels in transom
• 2 saildrive 29Hp diesel engines
• Soundproofing on cabin bulkheads in engine compartment
• Air intake through rear panel
• 12V extractor fan
• 1 12V 70Ah gel cell starter battery per engine
• Fuel filter with vessel
• Seawater filter
• Exhaust with water tank

Electrical

• 12V backlit electrical unit in galley near map table
• LCD screen with: voltmeter, ammeter, fresh water gauge, fuel gauge, battery level alarm
• 2 service batteries 12V - 140Ah
• Battery circuit-breaker:
• Service, under portside stern bench
• Engine, under port side and starboard side stern bench
• LED spotlights

Sails

• 1 mainsail with definite roach, 56m² with batten
  set and, Lagoon logo
• 1 Genoa on winch with anti-UV protection strip,
  28m²

Rigging

STANDING RIGGING

• 15.69m anodised aluminium mast on coachroof (Air-draught 20.30m)
• Double spreader rig
• Anodised aluminium boom
• 2 stay chains
• 1 stay chain on transversal crossbeam

RUNNING RIGGING

• 1 double-purchase mainsail halyard
• 1 Genoa halyard
• Mainsail sheet led back to helm with adjustment pulley and traveller on rigid Bimini
• 2 Genoa sheets led back to helm on port side
• 2 Genoa sheet travellers
• 3 winches at helm opposite port stern side of coachroof.
• 1 46.2ST winch for:
  - Mainsail halyard
  - Genoa halyard
  - Genaker/Spinnaker sheet(optional)
  - Genoa furlerwinch
  - Mainsail sheet
• 1 46.2ST winch for:
  - Topping lift
  - port Genoa sheets
  - Reefing line 1 (auto)
  - Reefing line 2 (auto)
  - Reefing line 3 (auto)
• 1 46.2ST winch for:
  - Starboard Genoa sheets
  - port main traveller
  - Starboard main traveller
• 1 fixed mainsail edge mooring
• A lock on bridge for Genoa furler winch
• 2 adjustable Lazy-Jacks at foot of mast
• 2 winch handles with handle casing

Disclaimer

The Company presents the information of this vessel in good faith.