Seawind 1170

STANDARD SPECIFICATIONS AND EQUIPMENT – OWNERS 3 Cabin Version

GENERAL:

• The overall finish of the Seawind 1170 will be consistent with a luxury world-standard yacht of this size and type. Only very high quality equipment is used throughout.

CONSTRUCTION:

• Finish: Full female moulded hulls & decks, exterior gelcoat finish with moulded-in non-slip surface on deck areas.
• Hull Laminate: Infused Vinyl Ester (Modified epoxy) resin laminate of the entire hull laminate. Infused Polyester resin elsewhere. Laminate specifications are certified to CE standards.

MAST/BOOM/SAILS:

• Clear anodised aluminium mast and boom. Single Spreader, 7/8 rig.
• Standing Rigging – Forestay 3/8 (10mm) 1 x 19 Dieform wire.– Sidestays 3/8 (10mm) 1 x 19 Dieform wire– Diamonds 5/16 (8mm) 1 x 19 Dieform wire.
• Halyards – Main halyard: 12 mm Spectra rope : Heavy duty shackle.– Jib halyard: 8 mm Spectra rope. Heavy duty shackle.– Topping lift: 10 mm rope, Heavy duty shackle.– Spinnaker Halyard: 10mm rope with snap-shackle spliced to end.
• Boom outhaul.
• 2 x mainsail single line reefing fitted.
• Main halyard & reefing lines to be led back to cockpit through turning blocks and rope clutches.
• Fully battened dacron mainsail. Triple stitched reinforced construction. Leach adjustable batten end caps. Fibreglass sail battens + batten cars.
• Cruising mainsail cover with integrated lazy jack system.
• Self-tacking dacron headsail with furler. Curved headsail traveller track with end stops.

• Flush mounted hatches & portholes (12 in total)4 x Forward deck hatches 470mm x 470mm2 x Mid cabin deck hatches 470mm x 470mm1 x Port mid cabin window hatch 507mm x 377mm1 x Port bathroom window hatch 507mm x 377mm1 x Port bathroom rear step portlight 600mm x 150mm1 x Galley window hatch 507mm x 377mm1 x Aft cabin window hatch 507mm x 377mm1 x Aft cabin rear step portlight
• Fibreglass Deck Hatches:Forward anchor & storage hatches x 5
• 6 x Docking cleats: Bow, mid & stern cleats on each hull.
• 1 x Heavy duty mooring cleat on forward walkway.
• Ventilation: 2 x forward cabin hatch vents.
• Mast base turning blocks.
• 12 x Rope clutches.
• Sheet winches :
• 1 x 45 – 2 speed self tailing at stbd helm 2 x 40 – 2 speed self tailing at port and stbd helm 1 x 40 – 2 speed self tailing at mast
• Stanchions/Rails: High quality stanchions, bow rails and stern rails with 3 life-lines. 700mm high for premium offshore safety – exceeding CE Category A requirements.
• 2 x Transom access gates with pelican hook releases.
• 2 x side access gates with pelican hook releases.
• Aft swim ladder: Telescoping stainless aft swim ladder with flat tread for comfort.

NAVIGATION/HELM:

• Steering compass at port & stbd helms.
• GRP Helm seats with ice box under port side and storage plus gas locker under stb side.
• Primary Helm (port) raised upholstered helm seat with folding backrest

FORWARD BEAM, CATWALK AND TRAMPOLINES:

• Aluminium forebeam.
• Pelican striker and adjustable cable.
• 1 x Mooring rollers above foredeck.
• 2 x Anchor roller under deck. Permanent stowage position for Plough (Delta type) anchor.
• Catwalk in foam-sandwich fibreglass.
• Plastic coated open weave trampolines.

AFT BEAM & DECK:

• Moulded fibreglass Targa Bar with curved mainsheet track.
• Lounge seating at aft beam.
• Full width hard top over cockpit.
• Windows over helms for sail visibility.
• Dinghy davits mounted from aft targa supports.

STEERING / RUDDER SYSTEM:

• Twin raised helm stations (dual) with: 2 X 32” composite steering wheels.
• Both wheels independently linked to steering system. – System offers back-up redundancy.
• Carbon fibre cross bar - rudder linkage.

INTERIOR:

• Lightweight, modern interior design.
• Synthetic timber flooring.
• Sides and cabin top lined with vinyl or moulded gelcoat.

SALOON:

• Polished timber dining table: Lowers to create coffee table or double bed.
• Upholstered settee.
• Nav station and chart table
• 2 x Large forward opening windows providing significant ventilation.
• Saloon windows in toughened glass.
• Saloon / cockpit doors: Moulded gelcoat tri-fold doors. Complete with folding mechanism for folding into Cockpit roof
• Removable helm windows.

GALLEY:

• Spacious galley with Polystone counter surfaces, timber accents.
• Twin burner LPG stove & oven. Stainless steel pot holders. Flame failure device to shut off LPG immediately in event of flame going out.
• Double bowl stainless steel sink.
• Pressure hot & cold fresh water system. Single lever mixing tap.
• Refrigerator: Front opening fridge
• Spacious freezer: 150 litre top loading.
• Under bench storage with polished timber door fronts & cutlery drawers.
• Pantry / crockery cupboard
• Inboard side of galley: Over-bench cupboard with timber polished timber finished fronts..
• Trash bin
• LPG solenoid control in galley.

SLEEPING CABINS:

• Port Side Owners Cabin
• Stbd Forward and Stbd Aft Guest Cabins
• Timber doors on all private cabins.
• Port & Starboard fwd cabins : Each queen sized berth
• Aft Starboard cabin : Double berth
• Mattresses to be 150mm (6”) quilted foam upholstered.
• Cabins lined.
• 12 volt lighting.
• Storage/Cupboards.
• Simulated timber flooring.

PORT HEAD:

• Polished timber lockable door.
• Manual toilet. Discharge via holding tank.
• Holding tanks built in. Discharge Pump out by shore station or directly overboard.
• 130L Waste tank
• Composite skin fittings and sea-cocks, to meet CE requirements and easily accessible
• Vanity basin with pressure hot & cold water.
• Separate shower stall with clear glass door. Wall mounted shower head & mixer tap.
• Electric shower bilge pump with direct overboard discharge.
• Large quantity cupboards / shelves to very high quality.

STARBOARD HEAD:

• Timber lockable door.
• Manual toilet. Discharge via holding tank.
• Holding discharge via shore station pump out or via direct discharge.
• Pipes, skin fittings and seacocks to be easily accessible and to meet survey requirements.
• Vanity basin with pressure hot & cold water. Shower head and basin mixer tap with electric shower bilge pump.
• Cupboard/shelves to very high quality.
• Toilet roll holder, towel rack & mounted mirror.

LIGHTING/ELECTRICAL SYSTEM:

• High quality DC electrical switch panel with circuit breakers, LED indicator lights and voltage display.
• Marine grade tinned electrical wiring with extensive use of heat sealed connectors.
• Batteries x 3 comprising:
• 450 Amp hour House System (2 x 225 Ah AGM / heavy duty batteries.
• Engine cranking battery – 1 x 700 CCA AGM.
• 230amp heavy duty isolation switch.
• 12v lighting : Numerous 12v interior lamps and courtesy lights throughout.
• Red night lights in cockpit for night sailing
• 3 x USB outlets:- Nav desk- Port fwd cabin- Stbd fwd cabin
• 1x 12v outlet:- Port helm
• CE approved navigation lights.
• Deck / Steaming combination light
• Mast head anchor / riding light.
• 2x 165w flush mounted solar panels and 25amp regulator.

PLUMBING/FRESH WATER TANKS:

• Pressure hot & cold water system to galley & both bathrooms with single lever mixer
• Hot water storage system (40 liter / 8.8 gallons) .
• Fresh water tank: 500 litres (132 gallons). Remote deck filler.
• Electric fresh water pump and accumulator/surge tank.
• Fresh water tank gauge.
• Electric bilge pumps (2) with controls integral with master battery switch panel.
• Float Switches with high level alarms (2).
• Manual bilge pumps (2) in each hull.
• Manual toilets in each head.
• Port bathroom with separate shower stall.
• Starboard bathroom with dual purpose faucet & shower.
• Electric sump pump for shower drain.
• 2 x LPG bottles – 4.5kg galvanised.

ENGINES:

• Twin Yanmar 29hp saildrive diesel engines. Fresh water cooling, rubber isolation mounts on reinforced fibreglass bed with integral oil drip pan.
• Three blade fixed propellers.
• Dual engine controls at port helm station.
• Helm console mounted engine instruments with push button start, tachometers, engine monitoring, warning systems & engine hour meters.
• Fuel tanks: Total 360 litres (95 gallons)
• Water intakes for engines protected by external strainer. (1 per engine)
• Primary Racor (or similar) water separator / fuel filter (1 per engine)
• Engine, fuel tank & fuel line installation to CE standards to meet offshore requirements.

ANCHORING / MOORING:

• Electric anchor winch with chain, located in foredeck locker to give a clean deck.
• Primary anchor is 45 lb Delta anchor type with 55m x 8mm short link galvanised chain.
• Primary anchor is stored in a specially designed anchor roller under the catwalk.
• Anchor winch has up switch at the winch plus a remote up / down control at the helm station.
• 3 x PVC Inflatable Fenders
• 4 x Mooring lines (each 15 metres x 14mm).

ANTIFOULING / STRIPING:

• Epoxy barrier coat plus 2 coats of high quality antifouling bottom paint.
• Seawind 1170 decals on each hull and stern.

Disclaimer

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.