Seawind 1370

Exterior / Standard Equipment

EXTERIOR / LAMINATE

• Finish:  Full female moulded hulls & decks, exterior gelcoat finish with moulded-in non-slip surface on deck areas.
  Laminates:

  
  

  • Hull Laminate: Vinyl Ester (Modified epoxy) resin infusion laminate of the entire hull laminate. PVC Foam cored construction using a hybrid of e-glass and carbon fiber reinforcement.
  • Deck Laminate: Vinyl Ester (Modified epoxy) resin infusion laminate of the entire deck laminate. PVC foam cored construction using a hybrid of e-glass and carbon fiber reinforcement.
  • Other Components: all other components shall be made using Polyester resin, vacuum formed or infused with a hybrid of e-glass and carbon fiber reinforcement over PVC foam cores.
  • Laminate specifications are to Australian survey compliant and international standards including European CE certification.

MAST/BOOM/SAILS

• Clear anodised aluminium mast and boom. Double Spreader, fractional rig.
• Standing Rigging: All fitted with turnbuckles and T-ball end fittings:
  • Forestay 1/2″ (12mm) 1 x 19 Dyform wire.
  • Sidestays 1/2″ (12mm) 1 x 19 Dyform wire
  • Diamonds 5/16 (8mm) 1 x 19 Dyform wire.
• Halyards:
  • Main halyard:  12 mm Spectra rope : Heavy duty shackle.
  • Genoa halyard:  10 mm Spectra rope. Heavy duty shackle.
  • Topping lift:  10 mm double braid, Heavy duty shackle.
  • Spinnaker Halyard:  12mm double braid with snap-shackle spliced to end.
  • Screecher Halyard: 12mm Spectra rope : 2:1 purchase with heavy duty block
• Boom outhaul.
• 3 x mainsail single line reefing fitted
• Main halyard, topping lift and reefing lines to be lead back to cockpit through turning blocks and rope clutches.
• Fully battened mainsail – Fibreglass sail battens.
• Mast adjustable ball bearing batten cars.
• Cruising mainsail cover with integrated lazy jack system.
• Self-tacking headsail. Curved headsail traveller track with end stops. Control sheet to cockpit.
• Headsail furler.

DECK EQUIPMENT

• Flush mounted deck hatches (8 in total)
  • 4 x Forward Hatches 470mm x 470mm
  • 2 x Mid cabin side hatches 507mm x 377mm
  • 1 x Port Bathroom window hatch 507mm x 377mm
  • 1 x Aft Cabin window hatch  507mm x 377mm
• Fibreglass Deck Hatches:
  • Cockpit storage hatches x1
  • Forward anchor & storage hatches x 6
  • Cockpit Icebox & hatch x1
• 6 x Docking cleats. Each side: bow, stern & amidships.
• 1 x Heavy duty mooring cleat on forward walkway.
• Ventilation: 2 x forward cabin hatch vents.
• Mast base turning blocks. Main halyard, reefs & sail controls led to cockpit.
• 15 x Rope clutches.
• Manual Sheet winches: 4 x 50ST – 2 speed self tailing.
• Stanchions/Rails: High quality stanchions, bow rails and stern rails with 3 life-lines.  700mm high surpassing international CE requirements.
• 2 x transom access gates with pelican hook releases.
• 2 x side access gates with pelican hook releases.
• Aft swim ladder: folding stainless aft swim ladder.

FORWARD BEAM, CATWALK AND TRAMPOLINES

• Forward beam section 251 x 162mm.
• Pelican striker and adjustable cable.
• 2 x Anchor rollers under deck.
• Permanent stowage position for anchor.
• Structural longaron in PVC foam-sandwich fibreglass.
• PVC coated open weave offshore trampolines.

AFT BEAM AND DECK

• Moulded fibreglass Targa Bar with curved mainsheet track.
• Offshore standard dinghy davits mounted to aft beam with 300kg working load.

RUDDER SYSTEM

• Twin, protected helm stations (dual)
• 2 X 39” composite steering wheels.
• Cable and tie rod linkage with both wheels independently linked to steering system. – system offers back-up redundancy.

Interior / Standard Equipment

INTERIOR FINISH

• Luxury finish interior.
• Sides and cabin top lined with textured fabric, simulated timber laminates or moulded gelcoat.
• Floors: Common area soles simulated timber.

SALOON

• Timber dining table: Lowers to create coffee table or double bed.
• Upholstered settee with day lounge
• Cocktail cabinet/storage under day lounge
• Timber chart table
• Forward opening windows in 10mm toughened glass in marine anodized aluminum frame. Side windows in 10mm toughened glass.
• Saloon / cockpit doors: Moulded gelcoat tri-fold doors. Complete with folding mechanism for folding into Targa walkway.

GALLEY

• Spacious galley with co-ordinated Polystone counter surfaces, timber accents.
• Three (3) burner LPG stove. Stainless steel pot holders. Flame failure device to shut off LPG immediately in event of flame going out.
• Built-in wall oven – LPG with electronic ignition.
• Double bowl stainless steel sink.
• Pressure hot & cold fresh water system. Single lever mixing tap.
• Refrigerator : Front opening upright fridge 130 litres.
• Under bench storage with timber door fronts & cutlery drawers.
• LPG solenoid control in galley.
• Full size 2 draw freezer

SLEEPING CABINS

• Timber doors on all private cabins.
• Port owners cabin: queen sized bed (2050mm x 1540mm)
• Starboard fwd cabin: queen sized bed (2050mm x 1540mm)
• Aft Starboard cabin : double bed (1950mm x 1420mm)
• Mattresses to be 125mm ( 5” ) quilted foam upholstered.
• Cabins lined.
• Recessed 24volt lighting.
• Storage/Cupboards.
• 1x  USB outlet in each cabin

PORT HEAD

• Timber lockable door.

• Electric toilet. Discharge via holding tank.

• Holding tanks built in. Discharge Pump out by shore station or directly overboard through 120L holding tank.
• Pipes, skin fittings and sea-cocks are easily accessible and to meet survey requirements.
• Vanity basin with pressure hot & cold water.
• Wall mounted shower head & mixer tap.
• Electric shower bilge pump with direct overboard discharge.
• Large quantity cupboards / shelves to very high quality.
• Toilet roll holder, towel rack & mirror mounted.

STARBOARD HEAD

• Timber lockable door.
• Electric toilet. Discharge via 100l holding tank.
• Holding tank built in. Discharge Pump out by shore station or directly overboard.
• Pipes, skin fittings and seacocks to be easily accessible and to meet survey requirements.
• Vanity basin with pressure hot & cold water. Shower head and basin mixer tap with electric shower bilge pump.
• Cupboard/shelves to very high quality.
• Toilet roll holder, towel rack & mirror mounted.

Electrical/ Mechanical / Plumbing /Engine / ETC Standard Equipment

LIGHTING / ELECTRICAL SYSTEM

• High quality DC electrical switch panel with circuit breakers, LED indicator lights and voltage display.
• Marine grade tinned electrical wiring with extensive use of heat sealed connectors..
• 4 Batteries in total comprising of: 2 x 12v 200Ah Deep Cycle Gel Batteries to give total 200Ah at 24v. 2 x AGM Start batteries
• 500amp heavy duty isolation switch.
• Battery Monitor
• 24V lighting : Numerous 24V LED interior lamps and courtesy lights throughout including recessed lights in cockpit. Dome lights in cockpit. (All lights are LED)
• 5 x 24V USB Outlets.
• Survey approved LED navigation lights. Port & Starboard mounted on bow rails.
• Deck floodlight mounted on mast.
• Mast head anchor / riding light.
• 2x 160w Solar Panels and 40amp regulator.

PLUMBING /FRESH WATER TANKS

• Pressure hot & cold water system. Hot water storage system (40 litre / 8.8 gallons). Hot & cold water to galley and both bathrooms.
• Galley fresh water tap is lever type.
• Fresh water tank: 600 litres (155 gallons). Remote deck filler.
• Electric fresh water pump.
• Electric bilge pumps (2) with controls integral with master battery switch panel. Float Switches (2).
• Manual bilge pumps (2) in each hull.
• Marelon through-hull fittings to CE international standard.
• Electric toilets in each head.
• Port and Starboard bathroom with separate shower stall.
• Electric sump pump for shower drain.
• 2 x LPG bottles – 4.5kg galvanised.
• Fresh water tank gauge.

ENGINES

• Twin Yanmar 40hp saildrive diesel engines. Fresh water cooling, rubber isolation mounts on reinforced fibreglass bed with integral oil drip pan.
• Three bladed fixed propellers.
• Fuel tanks: Total 520 litres (137 gallons) in two CE approved pressure tested polyethylene welded tanks. Fuel gauges fitted.
• Water intakes for engines protected by external strainer. (1 per engine)
• Primary Racor water separator / fuel filters, secondary engine fuel filters. Engine, fuel tank & fuel line installation to CE standards.
• Console mounted engine instruments with electric tachometers, engine monitoring & warning systems, engine hour meters.

 

NAVIGATION

• Steering compass.
• DSC VHF radio.

ANCHORING / MOORING

• Electric anchor winch with chain & gypsy. Located under locker to give clean deck. Primary anchor is 55 lb Delta type with 55 mtrs x 10mm short link galvanised chain.
• Primary anchor is stored in a specially designed anchor roller under the forward beam.
• Anchor winch has wired remote at the winch plus a remote up / down control at the helm station.
• 4 x PVC Inflatable Fenders
• 4 x Mooring lines (each 15 metres x 14mm).

ANTIFOULING / STRIPING

• Epoxy barrier coat plus 2 coats of high quality Altex antifouling bottom paint.
• Seawind 1370 decals on each hull and stern.

Disclaimer

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.